Corn Electronics GR701 E-ATX PC case Dragon Ball Orange
- ATX Full Tower
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Corn Electronics
Full-tower E-ATX case supporting 420 mm radiators top and front, supplied with four 140 mm PWM fans and dual tempered-glass panels
Options ROG Se7en White
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Corn Electronics GR701 is a full-tower chassis built for E-ATX, ATX, Micro-ATX and Mini-ITX motherboards up to 12 by 10.9 inches. It ships with four 140 mm PWM fans pre-installed at the front and rear, and includes a metal GPU holder for cards up to 460 mm long. The layout suits builders planning high-capacity liquid cooling or heavy graphics cards.
Both front and top positions accept radiators up to 420 mm alongside three 140 mm fans each, while the rear takes a 120 mm or 140 mm unit. Removable dust filters cover front, top and bottom intakes, and tempered glass on both side panels exposes the interior. A maximum CPU cooler height of 190 mm and 34 mm cable-management space keep airflow paths clear.
An integrated ARGB hub controls lighting for the pre-installed fans, and the front panel provides a headphone jack, four USB 3.2 Gen 1 ports, one USB 3.2 Gen 2 Type-C and either USB 4.0 or USB 3.2 Gen 2x2 Type-C at 60 W charging. Vertical GPU mounting adds three extra expansion slots, while drive bays hold five 2.5-inch drives plus two combo 2.5/3.5-inch bays.
| Model | international version |
|---|---|
| Type | ATX Full Tower |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The front and top each accept three 140 mm fans or a 420 mm radiator; use the included brackets to secure the radiator first, then clip the fans onto the same rails so the front I/O stays clear.
Removable mesh filters sit at the front, top and bottom; pull each frame outward, rinse with water, dry fully and slide back into the grooves.
The case allows up to 190 mm from motherboard tray to the tempered glass panel; measure your cooler including fan clips to stay under that limit.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟