نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Full-tower E-ATX case in Kirby-Pink with dual tempered glass panels, four 140 mm fans and metal GPU holder

Corn Electronics

Corn Electronics GR701 E-ATX PC case Kirby-Pink

SKU CH-57QN-X63FT

Full-tower E-ATX case with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, a metal GPU holder and 60 W USB-C fast charging in a Kirby-Pink finish

  • TypeATX Full Tower

Options Kirby

عرض 48 تكوينات إضافية

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • E-ATX motherboard support fits 12 inch by 10.9 inch boards
  • Dual 420 mm radiator mounts front and top for high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder secures cards up to 460 mm length
  • Front I/O includes USB 3.2 Gen 2 Type-C and USB 4.0 or 3.2 Gen 2x2 Type-C

Built for E-ATX builders

The GR701 is a full-tower chassis that accepts E-ATX boards up to 12 by 10.9 inches plus standard ATX, Micro-ATX and Mini-ITX. It ships with four 140 mm PWM fans already mounted and includes a metal GPU holder plus dedicated component storage. The Kirby-Pink finish uses UV printing that resists fading.

Upgrade from mid-tower limits

Builders constrained by shorter GPU clearance or smaller radiator mounts gain 460 mm graphics-card length and 420 mm dual-radiator support at both front and top. The jump is worth it when a 360 mm or 420 mm loop is required and the current case maxes out at 280 mm or 360 mm. Nine horizontal slots plus three vertical slots also free up space for extra add-in cards.

Straightforward assembly with weight caveats

Removable dust filters on front, top and bottom simplify cleaning while 34 mm of cable-management depth eases routing. The tempered glass panels on both sides lift off for access, but the 20.8 kg mass demands two-person handling and a sturdy surface. Ensure the chosen power supply stays within the 240 mm length limit and the CPU cooler does not exceed 190 mm height.

أبرز المميزات

  • E-ATX motherboard support fits 12 inch by 10.9 inch boards
  • Dual 420 mm radiator mounts front and top for high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder secures cards up to 460 mm length
  • Front I/O includes USB 3.2 Gen 2 Type-C and USB 4.0 or 3.2 Gen 2x2 Type-C

المواصفات

Modelinternational version
TypeATX Full Tower

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What motherboard form factors fit the GR701 E-ATX case?

The case supports E-ATX up to 12 by 10.9 inches, ATX, Micro-ATX and Mini-ITX motherboards.

How do I install the pre-installed 140 mm PWM fans and the ARGB fan hub?

The three front and one rear 140 mm PWM fans come pre-mounted; connect their PWM and ARGB cables to the included hub, then link the hub to a motherboard 5 V ARGB header and a fan header.

When should I clean the removable dust filters on this case?

Remove and clean the front, top and bottom filters every few months or when airflow drops, using compressed air or a rinse with water and full drying before refitting.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.