暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Full-tower E-ATX case in Kirby-Pink with dual tempered glass panels, four 140 mm fans and metal GPU holder

Corn Electronics

Corn Electronics GR701 E-ATX PC case Kirby-Pink

SKU CH-57QN-X63FT

Full-tower E-ATX case with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, a metal GPU holder and 60 W USB-C fast charging in a Kirby-Pink finish

  • TypeATX Full Tower

Options Kirby

他に 48点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • E-ATX motherboard support fits 12 inch by 10.9 inch boards
  • Dual 420 mm radiator mounts front and top for high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder secures cards up to 460 mm length
  • Front I/O includes USB 3.2 Gen 2 Type-C and USB 4.0 or 3.2 Gen 2x2 Type-C

Built for E-ATX builders

The GR701 is a full-tower chassis that accepts E-ATX boards up to 12 by 10.9 inches plus standard ATX, Micro-ATX and Mini-ITX. It ships with four 140 mm PWM fans already mounted and includes a metal GPU holder plus dedicated component storage. The Kirby-Pink finish uses UV printing that resists fading.

Upgrade from mid-tower limits

Builders constrained by shorter GPU clearance or smaller radiator mounts gain 460 mm graphics-card length and 420 mm dual-radiator support at both front and top. The jump is worth it when a 360 mm or 420 mm loop is required and the current case maxes out at 280 mm or 360 mm. Nine horizontal slots plus three vertical slots also free up space for extra add-in cards.

Straightforward assembly with weight caveats

Removable dust filters on front, top and bottom simplify cleaning while 34 mm of cable-management depth eases routing. The tempered glass panels on both sides lift off for access, but the 20.8 kg mass demands two-person handling and a sturdy surface. Ensure the chosen power supply stays within the 240 mm length limit and the CPU cooler does not exceed 190 mm height.

特長

  • E-ATX motherboard support fits 12 inch by 10.9 inch boards
  • Dual 420 mm radiator mounts front and top for high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder secures cards up to 460 mm length
  • Front I/O includes USB 3.2 Gen 2 Type-C and USB 4.0 or 3.2 Gen 2x2 Type-C

仕様

Modelinternational version
TypeATX Full Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard form factors fit the GR701 E-ATX case?

The case supports E-ATX up to 12 by 10.9 inches, ATX, Micro-ATX and Mini-ITX motherboards.

How do I install the pre-installed 140 mm PWM fans and the ARGB fan hub?

The three front and one rear 140 mm PWM fans come pre-mounted; connect their PWM and ARGB cables to the included hub, then link the hub to a motherboard 5 V ARGB header and a fan header.

When should I clean the removable dust filters on this case?

Remove and clean the front, top and bottom filters every few months or when airflow drops, using compressed air or a rinse with water and full drying before refitting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。