暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Full-tower E-ATX case with dual tempered glass panels, UV-printed Doraemon artwork, four pre-installed 140 mm fans

Corn Electronics

Corn Electronics GR701 E-ATX PC case Doraemon 420 mm radiator 4 x 140 mm fans

SKU CH-Z0Y3-B9GGS

E-ATX full-tower chassis with dual 420 mm radiator mounts, four 140 mm PWM fans, metal GPU holder, component storage, ARGB fan hub and 60 W fast-charging USB Type-C, finished in a Doraemon theme

  • TypeATX Full Tower

Options Doraemon

他に 48点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Supports E-ATX boards up to 12 x 10.9 inches
  • Fits 420 mm radiators at front and top
  • Four 140 mm PWM fans pre-installed for airflow
  • Metal GPU holder secures cards up to 460 mm
  • Dual tempered glass panels show the build

Full-tower E-ATX chassis for high-end builds

The Corn Electronics GR701 supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards up to 12 by 10.9 inches. It fits graphics cards up to 460 mm long and CPU coolers up to 190 mm tall. Four 140 mm PWM fans are pre-installed at the front and rear for immediate airflow.

Dual 420 mm radiator mounts with metal GPU holder

Front and top panels each accept radiators up to 420 mm or three 140 mm fans. A rear 140 mm or 120 mm radiator is also supported. The metal GPU holder prevents sag on heavy cards, while removable dust filters on front, top and bottom simplify cleaning.

Replaces mid-tower cases limited to 360 mm cooling

Builders moving from a chassis that caps radiator support at 360 mm gain the 420 mm option for lower fan speeds or higher overclocks. The 34 mm cable-management space and 240 mm PSU clearance keep the interior tidy. Buyers needing more than two 3.5-inch drive bays or a lighter case for frequent moves should look elsewhere.

特長

  • Supports E-ATX boards up to 12 x 10.9 inches
  • Fits 420 mm radiators at front and top
  • Four 140 mm PWM fans pre-installed for airflow
  • Metal GPU holder secures cards up to 460 mm
  • Dual tempered glass panels show the build

仕様

Modelinternational version
TypeATX Full Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What USB standard does the front USB-C port use and what speed does it cap at?

The front panel includes one USB 4.0 Type-C port that can run at up to 40 Gbps, though some regions receive a USB 3.2 Gen 2x2 Type-C port instead.

How much clearance does the case allow for a CPU air cooler and a graphics card?

Maximum CPU cooler height is 190 mm and maximum GPU length is 460 mm.

What steps are needed to mount the motherboard and where do builders often go wrong?

Install motherboard standoffs matching the E-ATX, ATX, Micro-ATX or Mini-ITX pattern, then secure the board with screws; a common mistake is forgetting the extra standoffs required for the wider E-ATX layout.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。