暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Full-tower E-ATX case with dual tempered-glass panels, front mesh, four pre-installed 140 mm fans, metal GPU holder and ARGB hub

Corn Electronics

Corn Electronics GR701 GhostBlade E-ATX PC case

SKU CH-4HYW-1MJBN

Full-tower E-ATX case with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, metal GPU holder and front USB 4.0 Type-C plus 60 W fast charging

  • TypeATX Full Tower

Options GhostBlade

他に 48点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Supports E-ATX motherboards up to 12 by 10.9 inches
  • Four 140 mm PWM fans pre-installed for strong airflow
  • Dual 420 mm radiator mounts on front and top
  • Vertical GPU bracket included for heavy graphics cards
  • Front panel offers USB 3.2 Gen 2 Type-C and USB 4.0 Type-C

Ideal for E-ATX custom-loop builders

The Corn Electronics GR701 GhostBlade is a full-tower chassis designed for E-ATX, ATX, Micro-ATX and Mini-ITX motherboards. It ships with four 140 mm PWM fans and an ARGB fan hub already installed. A metal GPU holder and dedicated component storage tray help organise heavy graphics cards and loose parts during assembly. Custom UV-printed side panels are available from the manufacturer.

Sustained thermal capacity for dual 420 mm radiators

Front and top mounts each accept radiators up to 420 mm, while the rear takes 120 mm or 140 mm units. This layout lets two triple-140 mm radiators run in parallel, spreading heat load across six fans instead of three. With 34 mm of cable-management depth behind the motherboard tray, tubing routes stay clean and airflow remains unobstructed during long rendering or compute sessions.

Heavy case requires two-person unboxing

At 20.8 kg the chassis is awkward for a single person to manoeuvre; plan for help when lifting it onto a bench. The tempered-glass side panels sit on precision hinges that must be aligned before tightening, otherwise the magnetic catches will not engage. Vertical GPU mounting uses three extra expansion slots, so verify bracket clearance with your specific card before committing to that orientation.

特長

  • Supports E-ATX motherboards up to 12 by 10.9 inches
  • Four 140 mm PWM fans pre-installed for strong airflow
  • Dual 420 mm radiator mounts on front and top
  • Vertical GPU bracket included for heavy graphics cards
  • Front panel offers USB 3.2 Gen 2 Type-C and USB 4.0 Type-C

仕様

Modelinternational version
TypeATX Full Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much heat can the front 420 mm radiator support dissipate during all-day loads?

The front panel accepts radiators up to 420 mm with three 140 mm PWM fans pre-installed, giving high airflow for sustained thermal loads.

Which power supply and motherboard must I already own for this case to work?

An ATX power supply no longer than 240 mm and an E-ATX, ATX, Micro-ATX or Mini-ITX motherboard are required.

Will my current full-length graphics card and tower cooler clear the side glass panels?

The case fits GPUs up to 460 mm long and CPU coolers up to 190 mm tall, leaving room for most existing high-end parts.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。