暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Full-tower E-ATX case with dual tempered-glass panels, SPY×FAMILY UV artwork and four 140 mm fans

Corn Electronics

Corn Electronics GR701 E-ATX PC case SPY×FAMILY edition

SKU CH-DG9Q-KYXV2

Full-tower E-ATX case with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, metal GPU holder and 60 W USB-C fast charging

  • TypeATX Full Tower

Options SPY×FAMILY

他に 48点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • E-ATX motherboard support up to 12 by 10.9 inches
  • 420 mm radiator capacity on both front and top panels
  • Four 140 mm PWM fans pre-installed for immediate airflow
  • Metal GPU holder secures cards up to 460 mm long
  • USB 4.0 Type C and 60 W fast charging on front I/O

SPY×FAMILY full-tower chassis

The Corn Electronics GR701 E-ATX case is built for enthusiasts who want a showcase build with licensed artwork. It fits E-ATX boards up to 12 by 10.9 inches, ATX, Micro-ATX and Mini-ITX, and holds GPUs up to 460 mm long. Dual tempered-glass panels expose the interior from both sides.

Upgrading from cramped mid-towers

Builders moving up from cases that limit radiator length or GPU clearance gain front and top support for 420 mm radiators plus a 140 mm rear mount. The jump is worth it when a custom loop or large AIO is planned and the current chassis cannot swallow a 360 mm or 420 mm unit. Vertical GPU brackets add three extra slots for rotated mounting.

Tool-free glass and cable room

Both glass panels lift off without screws, and 34 mm of routing space behind the motherboard tray eases wire management. Pre-installed 140 mm PWM fans at front and rear connect to the included ARGB hub. The heavy 20.8 kg steel frame demands two-person handling, and the front USB 4.0 or 3.2 Gen 2x2 Type-C port varies by region, so verify the header on the chosen motherboard.

特長

  • E-ATX motherboard support up to 12 by 10.9 inches
  • 420 mm radiator capacity on both front and top panels
  • Four 140 mm PWM fans pre-installed for immediate airflow
  • Metal GPU holder secures cards up to 460 mm long
  • USB 4.0 Type C and 60 W fast charging on front I/O

仕様

Modelinternational version
TypeATX Full Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard form factors fit in the GR701 E-ATX case?

The case supports E-ATX up to 12 by 10.9 inches, ATX, Micro-ATX and Mini-ITX motherboards.

How do I install the four pre-installed 140 mm PWM fans and the ARGB hub?

Three 140 mm fans are already mounted at the front and one at the rear; connect each fan’s PWM and ARGB cables to the included hub, then plug the hub into a motherboard 5 V ARGB header and a fan header.

When should I clean the removable dust filters on the front, top and bottom panels?

Remove and rinse the magnetic filters every few months or when visible dust builds up to keep airflow unrestricted.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。