暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Full-tower E-ATX case with dual tempered glass panels, UV-printed Battle Through the Heavens artwork

Corn Electronics

Corn Electronics GR701 E-ATX PC case Battle Through the Heavens

SKU CH-JDR3-E3S3M

Full-tower E-ATX chassis with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, vertical GPU bracket and front USB 4.0 Type-C

  • TypeATX Full Tower

Options Battle Through the Heavens

他に 48点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • E-ATX motherboard support fits 12 by 10.9 inch boards
  • Dual 420 mm radiator mounts on front and top enable high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder and vertical-mount brackets secure graphics cards up to 460 mm long
  • Front panel includes USB 3.2 Gen 2 Type-C and USB 4.0 Type-C for fast device connectivity

Build for E-ATX and heavy cooling

The GR701 is a full-tower chassis that accepts E-ATX boards up to 12 by 10.9 inches and fits front or top radiators as large as 420 mm. Four 140 mm PWM fans come pre-installed, a metal GPU holder supports cards to 460 mm, and an ARGB hub handles lighting. Removable dust filters on three sides and 34 mm of cable-routing space keep the interior clean.

Suited for custom-loop builders not for portable

This case targets enthusiasts who want high-capacity liquid cooling, vertical GPU mounting and a themed UV-printed exterior. The 20.8 kg weight and 268 by 639 by 659 mm footprint make it impractical for frequent moves, LAN events or desks with limited depth. Buyers needing a compact or lightweight enclosure should look elsewhere.

Deciding spec front and top 420 mm radiator support

Dual 420 mm radiator clearance is the single figure that determines whether this chassis matches a planned cooling loop. If the build requires that length at both front and top simultaneously the GR701 fits; if the loop uses smaller radiators or air cooling only the extra capacity goes unused.

特長

  • E-ATX motherboard support fits 12 by 10.9 inch boards
  • Dual 420 mm radiator mounts on front and top enable high-capacity liquid cooling
  • Four pre-installed 140 mm PWM fans deliver strong airflow out of the box
  • Metal GPU holder and vertical-mount brackets secure graphics cards up to 460 mm long
  • Front panel includes USB 3.2 Gen 2 Type-C and USB 4.0 Type-C for fast device connectivity

仕様

Modelinternational version
TypeATX Full Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will a 420 mm radiator fit in the front or top without blocking the 140 mm fans?

Both front and top support 420 mm radiators alongside the three pre-installed 140 mm fans, so the radiator mounts without removing them.

How loud are the four pre-installed 140 mm PWM fans under continuous load?

The four 140 mm PWM fans adjust speed automatically; at full load they move more air at lower RPM than smaller fans, keeping noise moderate during all-day operation.

Does the case include the vertical GPU bracket or must I buy it separately?

The metal GPU holder and three additional vertical expansion slots are included, so no extra bracket is needed for vertical mounting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。