نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Compact aluminium mini-ITX case with tempered glass side panel

Corn Electronics

Corn Electronics i100 Pro ITX/DTX Aluminium Tempered Glass Mini PC Case

SKU CH-BG66-RWKD9

Mini-ITX/DTX aluminium chassis with tempered glass, vertical GPU mounting, 360 mm radiator support and front USB 3.1 Gen 2 Type-C

  • Supports 360 mm radiators with 55 mm thickness limit
  • Vertical GPU mounting with included PCIe riser cable
  • Fits 373 mm graphics cards when side SSDs removed
  • 77 mm CPU cooler clearance in vertical layout
  • Front I/O includes USB 3.1 Gen2 Type-C port

Compact aluminium chassis for ITX and DTX builds

The Corn Electronics i100 Pro accepts Mini-ITX and DTX motherboards up to 170 by 203 millimetres. Its tempered-glass panels showcase a multi-chamber layout that separates the CPU and GPU zones. Builders can mount graphics cards vertically with the included PCIe riser cable or horizontally for traditional air-cooled layouts. The case ships new and ready for custom liquid-cooling loops or all-in-one radiators.

Bundled riser cable and flexible drive cage change

A PCIe riser cable is included, enabling vertical GPU mounting in the multi-chamber configuration. The drive cage supports one 3.5-inch hard drive plus two 2.5-inch SSDs or three 2.5-inch SSDs, and can be repositioned to extend maximum graphics-card length from 345 to 373 millimetres. Front I/O provides one USB 3.1 Gen 2 Type-C port, one USB 3.0 port and separate audio and microphone jacks.

Suits small-form-factor enthusiasts who want

This case fits builders planning a 360, 280, 240 or 120 millimetre radiator up to 55 millimetres thick in the top mount, or a CPU air cooler up to 77 millimetres in vertical mode and 166 millimetres in horizontal mode. Power supplies are limited to ATX or SFX units no longer than 175 millimetres without a bottom fan or 150 millimetres with one. Buyers needing longer PSU clearance, taller air coolers in vertical orientation, or motherboards larger than DTX should consider other enclosures.

أبرز المميزات

  • Supports 360 mm radiators with 55 mm thickness limit
  • Vertical GPU mounting with included PCIe riser cable
  • Fits 373 mm graphics cards when side SSDs removed
  • 77 mm CPU cooler clearance in vertical layout
  • Front I/O includes USB 3.1 Gen2 Type-C port

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Will I need to replace the dust filters or front panel ports on the i100 Pro over time?

The case uses removable magnetic dust filters on the top and bottom panels that can be washed and reused, while the front I/O includes a USB 3.1 Gen 2 Type-C port, USB 3.0, audio and mic jacks built into the chassis and are not designed as user-replaceable modules.

What is the first thermal limit I will hit when running a high-wattage CPU and GPU together all day?

In the dual-chamber liquid-cooling layout the CPU cooler height is capped at 77 mm and the top radiator thickness including fans cannot exceed 55 mm, so radiator surface area becomes the limiting factor before the chassis itself runs out of airflow.

How loud and hot does the i100 Pro get when the system runs 24/7 with a 360 mm radiator and a long graphics card?

With the top-mounted 360 mm radiator (max 55 mm thick) and up to six 120 mm or four 140 mm fans, heat is exhausted directly upward; noise will depend on the fan curves you set, but the aluminium panels and tempered glass do not add active cooling of their own.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.