NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Corn Electronics
Mini-ITX/DTX aluminium chassis with tempered glass, vertical GPU mounting, 360 mm radiator support and front USB 3.1 Gen 2 Type-C
The Corn Electronics i100 Pro accepts Mini-ITX and DTX motherboards up to 170 by 203 millimetres. Its tempered-glass panels showcase a multi-chamber layout that separates the CPU and GPU zones. Builders can mount graphics cards vertically with the included PCIe riser cable or horizontally for traditional air-cooled layouts. The case ships new and ready for custom liquid-cooling loops or all-in-one radiators.
A PCIe riser cable is included, enabling vertical GPU mounting in the multi-chamber configuration. The drive cage supports one 3.5-inch hard drive plus two 2.5-inch SSDs or three 2.5-inch SSDs, and can be repositioned to extend maximum graphics-card length from 345 to 373 millimetres. Front I/O provides one USB 3.1 Gen 2 Type-C port, one USB 3.0 port and separate audio and microphone jacks.
This case fits builders planning a 360, 280, 240 or 120 millimetre radiator up to 55 millimetres thick in the top mount, or a CPU air cooler up to 77 millimetres in vertical mode and 166 millimetres in horizontal mode. Power supplies are limited to ATX or SFX units no longer than 175 millimetres without a bottom fan or 150 millimetres with one. Buyers needing longer PSU clearance, taller air coolers in vertical orientation, or motherboards larger than DTX should consider other enclosures.
Aún no hay especificaciones publicadas para este artículo.
The case uses removable magnetic dust filters on the top and bottom panels that can be washed and reused, while the front I/O includes a USB 3.1 Gen 2 Type-C port, USB 3.0, audio and mic jacks built into the chassis and are not designed as user-replaceable modules.
In the dual-chamber liquid-cooling layout the CPU cooler height is capped at 77 mm and the top radiator thickness including fans cannot exceed 55 mm, so radiator surface area becomes the limiting factor before the chassis itself runs out of airflow.
With the top-mounted 360 mm radiator (max 55 mm thick) and up to six 120 mm or four 140 mm fans, heat is exhausted directly upward; noise will depend on the fan curves you set, but the aluminium panels and tempered glass do not add active cooling of their own.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?