Corn Electronics Jonsbo MOD3 Open Frame ATX Mid Tower Purple PC Case
- ATX Mid Tower
- Purple
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Corn Electronics
Open-frame ATX mid-tower with aluminium-magnesium structure, 4 mm tempered glass side panel, 49 mm rear cable space, front 5V ARGB lighting, supports E-ATX boards, 400 mm GPU, 360 mm top radiator.
The Corn Electronics MOD3 is an open-design ATX mid-tower finished in purple aluminium-magnesium alloy with a 4.0mm tempered-glass side panel. It targets enthusiasts who want their high-end hardware on display while supporting custom liquid-cooling loops. The chassis fits Micro-ATX, ATX and E-ATX motherboards and includes a 5V ARGB mecha lighting strip on the front panel.
Confirm your board is no larger than E-ATX and that your graphics card does not exceed 400mm. The power-supply bay accepts units up to 195mm long, so measure your PSU against that limit. CPU coolers must stay within 170mm of height. Radiator support tops out at 360mm on the roof, and the case ships without a power supply.
The structure uses 2.5mm and 2.0mm aluminium-magnesium alloy panels for rigidity, while the 4.0mm glass side panel gives a clear view of the interior. A 49mm deep cable-management space behind the motherboard tray keeps routing tidy. Dust filters are fitted, and drive mounts provide one 3.5-inch bay plus two 2.5-inch bays. Seven expansion slots accommodate full-length cards.
| Brand | Jonsbo |
|---|---|
| Series | MOD3 |
| Type | ATX Mid Tower |
| Color | Purple |
| With Power Supply | No |
| Motherboard Compatibility | Micro ATX / ATX / E-ATX |
| Dust Filters | Yes |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Fan Options | Front - 3 x 120mm / Top - 2 x 120mm / Top - 3 x 120mm |
| Radiator Options | Top - Up to 360mm |
| Max GPU Length | 400 mm |
| Max CPU Cooler Height | 170 mm |
| Max PSU Length | 195 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
No power supply is included. You must provide an ATX PSU up to 195 mm long, a motherboard (Micro ATX, ATX or E-ATX), a CPU cooler no taller than 170 mm, and a graphics card up to 400 mm. The case supplies one 3.5" bay, two 2.5" bays, dust filters, 49 mm rear cable routing space, and a 4.0 mm tempered glass side panel.
The top supports up to 360 mm. Choose 360 mm if your motherboard and RAM clearance allow three 120 mm fans; otherwise a 240 mm radiator with two 120 mm fans fits more builds while still delivering strong cooling.
Any card measuring 400 mm or less will fit. Measure your card including the power connector; if it exceeds 400 mm it will not install in this chassis.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟