Corsair ML140 PRO LED CO-9050048-WW 140mm Blue PWM case fan
- 1 Fan
- No Controller
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Corsair
140 mm magnetic-levitation PWM fan runs 400–2000 RPM for 20–97 CFM airflow at 16–37 dBA with red LED lighting
LED Red
This 140 mm case fan uses magnetic-levitation bearings and a custom rotor to balance static pressure with airflow. A single four-pin PWM connector allows motherboard speed control from 400 to 2,000 RPM. Red LEDs provide illumination while the fan moves 20 to 97 CFM at 16 to 37 dBA. The 25 mm thick frame fits standard mounting points.
The wide speed range suits systems that run silent at idle and ramp up under load, while the magnetic bearing reduces wear for long-term reliability. Users who require a bundled fan controller or multi-colour lighting should look at other models, as this unit includes neither a controller nor RGB LEDs. Builders with tight clearances under 25 mm will need a slimmer alternative.
Under continuous load the fan can maintain its upper RPM limit, delivering 97 CFM while noise settles at the rated 37 dBA. Magnetic levitation eliminates physical contact, so bearing noise does not increase over time and performance remains consistent during extended sessions. The PWM curve lets the motherboard hold a steady speed rather than cycling, keeping temperatures stable without sudden acoustic spikes.
| Brand | Corsair |
|---|---|
| Series | ML140 PRO LED |
| Model | CO-9050047-WW |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Magnetic Levitation |
| RPM | 400 - 2,000 RPM |
| Air Flow | 20 – 97 CFM |
| Noise Level | 16 – 37 dBA |
| Power Connector | 4 Pin |
| LED | Red |
| Features | Magnetic Bearing: harnesses magnetic levitation technology to provide lower noise, higher performance, and a longer lifespan Custom Rotor Design: delivers the perfect balance between high static pressure and high airflow, operating flawlessly in the most challenging environments Extensive PWM Control Range: A 1,600 RPM PWM control range gives you total control between silence and absolute performance Color Customization: Replaceable corners mounted to anti-vibration rubber dampers allow you to match your fans with the rest of your build (Available separately in Red, White, and Blue) |
| Dimensions | 140mm x 140mm x 25mm |
| Package Contents | ML140 PRO LED, 140mm Premium Magnetic Levitation PWM Fan Fan mounting screws |
| وزن الشحنة | 0.32 kg |
| أبعاد الطرد | 178 × 150 × 36 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, it uses a 4-pin power connector for PWM speed control between 400 and 2000 RPM.
The fan measures 140mm x 140mm x 25mm, matching standard 140mm case or radiator mounts.
At minimum speed the noise level is 16 dBA and airflow is 20 CFM; at maximum it reaches 37 dBA and 97 CFM.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟