نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 240-pin DDR3 DIMM with black memory chips and gold contacts, no heat spreader

Crucial

Crucial CT204872BB160B 16GB DDR3 1600 ECC Registered server RAM

SKU CH-1JKV-JKPYC MPN CT204872BB160B

16 GB DDR3 1600 ECC Registered module with CL11 latency and 1.50 V operation

  • Capacity16GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • ECC protection detects and corrects single-bit errors for data integrity
  • Registered buffering reduces electrical load on the memory controller for stability
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • CL11 latency at 1.50V balances timing and power efficiency
  • 240-pin DIMM form factor fits standard DDR3 server slots

16GB DDR3 1600 ECC Registered Module

This 16GB DDR3 1600 module delivers ECC Registered operation for server platforms that require error correction and signal buffering. The 2Rx4 organisation and CL11 latency support stable throughput in multi-channel configurations. It is built for administrators who need registered memory to populate high-capacity slots in compatible systems.

Replaces non-ECC or unbuffered DDR3

The jump is worthwhile when your motherboard mandates registered DIMMs and ECC protection for data integrity. Standard unbuffered or non-ECC modules will not function in these slots, so this kit enables the capacity and reliability the platform expects. It suits upgrades where registered memory is a hard requirement rather than an option.

Verify 240-pin DDR3 registered support

Confirm the system accepts 240-pin DDR3 registered DIMMs at 1.50V and can address 16GB per slot with 2Rx4 density. The board must support quad-channel population rules for this kit to operate as intended. Without registered memory support, the modules will not post.

أبرز المميزات

  • ECC protection detects and corrects single-bit errors for data integrity
  • Registered buffering reduces electrical load on the memory controller for stability
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • CL11 latency at 1.50V balances timing and power efficiency
  • 240-pin DIMM form factor fits standard DDR3 server slots

المواصفات

BrandCrucial
ModelCT204872BB160B
Capacity16GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
وزن الشحنة0.06 kg
أبعاد الطرد178 × 122 × 13 mm

أسئلة حول هذا المنتج

Will this 240-pin DDR3 DIMM fit my server's memory slots?

The module uses the standard 240-pin DDR3 form factor and 1.50V voltage; verify your server accepts registered ECC DDR3 1600 before installing.

How do I install this registered ECC module correctly?

Power down the server, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, then power on to confirm detection.

What maintenance or replacement should I expect for this 16GB kit?

No routine maintenance is required; if a module fails, replace it with an identical 16GB DDR3 1600 CL11 registered ECC 2Rx4 DIMM to preserve quad-channel operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.