نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Dayton 6K321 belt drive motor red steel rigid plastic 1 HP 1725 rpm 115 208 230 V

Dayton

Dayton 6K321 Belt Drive Motor 1 HP 1725 rpm 115/208-230 V

SKU CH-A75F-P8YDX

A 1 HP belt-drive motor running at 1725 rpm on 115/208-230 V for HVAC and compressor duty

  • 1 HP capacitor-start motor powers HVAC and compressor equipment
  • 1725 rpm belt-drive speed suits general-purpose fan and tool applications
  • Dual-voltage 115/208-230 V wiring fits standard single-phase supplies
  • Open drip-proof steel frame resists dust and moisture in workshop environments
  • Red rigid-plastic end shields protect windings during handling and installation

Motor type and voltage

This Dayton 6K321 is a single-phase belt drive motor rated at 1 horsepower and 1725 rpm. It operates on 115, 208 or 230 volts and uses a capacitor start design built for continuous duty. The steel and rigid plastic construction suits HVAC systems, compressors and similar equipment.

Fit for capacitor start applications

It suits installers who need a standard 1 HP motor for belt driven fans, pumps or tools where the supply is 115, 208 or 230 volts. It does not suit buyers who need a three-phase motor, a different horsepower rating, a variable speed drive or an enclosure type other than open drip proof.

Voltage and phase decide compatibility

The motor runs on single-phase power at 115, 208 or 230 volts so the supply must match one of these voltages exactly. If the installation requires three-phase power or a voltage not listed here this motor will not work.

أبرز المميزات

  • 1 HP capacitor-start motor powers HVAC and compressor equipment
  • 1725 rpm belt-drive speed suits general-purpose fan and tool applications
  • Dual-voltage 115/208-230 V wiring fits standard single-phase supplies
  • Open drip-proof steel frame resists dust and moisture in workshop environments
  • Red rigid-plastic end shields protect windings during handling and installation

المواصفات

BrandDAYTON

أسئلة حول هذا المنتج

How is the Dayton 6K321 motor wired for 115 V versus 208-230 V, and which terminal block step is often missed?

The motor uses dual-voltage windings; follow the wiring diagram on the nameplate to link the correct leads for 115 V or 208-230 V, and remember to move the internal jumper strap — skipping that strap change is the most common error.

What maintenance does the capacitor-start mechanism need over time?

The capacitor-start design relies on a centrifugal switch and start capacitor; inspect the switch contacts for pitting every few thousand hours and replace the capacitor if the motor hums or fails to reach 1725 rpm.

At what point does the open drip-proof enclosure limit continuous operation?

The ODP housing relies on ambient airflow for cooling; if the surrounding temperature rises or dust restricts the vent openings, the winding temperature will hit its thermal limit first, causing the overload to trip.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.