暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Dayton 6K321 belt drive motor red steel rigid plastic 1 HP 1725 rpm 115 208 230 V

Dayton

Dayton 6K321 Belt Drive Motor 1 HP 1725 rpm 115/208-230 V

SKU CH-A75F-P8YDX

A 1 HP belt-drive motor running at 1725 rpm on 115/208-230 V for HVAC and compressor duty

  • 1 HP capacitor-start motor powers HVAC and compressor equipment
  • 1725 rpm belt-drive speed suits general-purpose fan and tool applications
  • Dual-voltage 115/208-230 V wiring fits standard single-phase supplies
  • Open drip-proof steel frame resists dust and moisture in workshop environments
  • Red rigid-plastic end shields protect windings during handling and installation

Motor type and voltage

This Dayton 6K321 is a single-phase belt drive motor rated at 1 horsepower and 1725 rpm. It operates on 115, 208 or 230 volts and uses a capacitor start design built for continuous duty. The steel and rigid plastic construction suits HVAC systems, compressors and similar equipment.

Fit for capacitor start applications

It suits installers who need a standard 1 HP motor for belt driven fans, pumps or tools where the supply is 115, 208 or 230 volts. It does not suit buyers who need a three-phase motor, a different horsepower rating, a variable speed drive or an enclosure type other than open drip proof.

Voltage and phase decide compatibility

The motor runs on single-phase power at 115, 208 or 230 volts so the supply must match one of these voltages exactly. If the installation requires three-phase power or a voltage not listed here this motor will not work.

特長

  • 1 HP capacitor-start motor powers HVAC and compressor equipment
  • 1725 rpm belt-drive speed suits general-purpose fan and tool applications
  • Dual-voltage 115/208-230 V wiring fits standard single-phase supplies
  • Open drip-proof steel frame resists dust and moisture in workshop environments
  • Red rigid-plastic end shields protect windings during handling and installation

仕様

BrandDAYTON

この商品に関する質問

How is the Dayton 6K321 motor wired for 115 V versus 208-230 V, and which terminal block step is often missed?

The motor uses dual-voltage windings; follow the wiring diagram on the nameplate to link the correct leads for 115 V or 208-230 V, and remember to move the internal jumper strap — skipping that strap change is the most common error.

What maintenance does the capacitor-start mechanism need over time?

The capacitor-start design relies on a centrifugal switch and start capacitor; inspect the switch contacts for pitting every few thousand hours and replace the capacitor if the motor hums or fails to reach 1725 rpm.

At what point does the open drip-proof enclosure limit continuous operation?

The ODP housing relies on ambient airflow for cooling; if the surrounding temperature rises or dust restricts the vent openings, the winding temperature will hit its thermal limit first, causing the overload to trip.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。