HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
DELL
960 GB 2.5-inch SATA enterprise SSD rated for 3 DWPD with 560 MB/s read and 510 MB/s write speeds
The Dell 0X31G3 delivers 960 GB of storage over a SATA interface with 3D TLC NAND. It is rated for 3 drive writes per day, making it suitable for mixed read and write workloads in servers, workstations and desktop PCs. The drive ships installed in a 2.5 inch Dell G14 tray for direct insertion into supported bays.
With no moving parts the SSD runs silently and generates minimal heat compared with mechanical drives. Sequential reads reach 560 MB/s and writes 510 MB/s while drawing only the power required by the SATA interface. Power-loss data protection helps preserve in-flight writes during unexpected shutdowns.
The supplied G14 tray fits 2.5 inch bays in Dell PowerEdge R-Series servers from generations 14 through 17, including models such as R640, R740, R650, R750, R660, R760, R670 and R770. Hot-swap capability allows removal or insertion without powering down the chassis. The SATA connector limits use to systems with SATA backplanes or controllers.
| Brand | Dell |
|---|---|
| Series | Generation 14 |
| Model | 0X31G3 |
| Form Factor | 2.5" |
| Capacity | 960GB |
| Interface | SATA III |
| Sustained Sequential Read | 560 MB/s |
| Sustained Sequential Write | 510 MB/s |
| Endurance | 3 DWPD |
| Features | Hot Swappable |
Slide the supplied G14 tray DXD9H into any 2.5-inch hot-swap bay until the latch clicks; the step often missed is fully engaging the latch so the SATA connector seats securely.
The 3 DWPD endurance rating means the 3D TLC NAND is warrantied for three full drive writes per day; plan replacement once the SMART wear indicator approaches the rated limit.
Sequential write throughput caps at 510 MB/s, so the SATA 6Gb/s interface saturates before the controller or NAND becomes the bottleneck.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟