DELL
DELL 0X31G3 960GB 3 DWPD SATA 2.5in enterprise SSD
960 GB 2.5-inch SATA enterprise SSD rated for 3 DWPD with 560 MB/s read and 510 MB/s write speeds
- Form Factor2.5"
- Capacity960GB
- InterfaceSATA III
- Sustained Sequential Read560 MB/s
- Sustained Sequential Write510 MB/s
- Endurance3 DWPD
- 960 GB capacity stores large datasets
- 560 MB/s read speed accelerates data access
- 510 MB/s write speed handles heavy write workloads
- 3 DWPD endurance rating supports mixed-use applications
- Hot-swappable design enables drive replacement without downtime
Dell G14 enterprise SSD for mixed workloads
The Dell 0X31G3 delivers 960 GB of storage over a SATA interface with 3D TLC NAND. It is rated for 3 drive writes per day, making it suitable for mixed read and write workloads in servers, workstations and desktop PCs. The drive ships installed in a 2.5 inch Dell G14 tray for direct insertion into supported bays.
Steady thermals and low power draw in operation
With no moving parts the SSD runs silently and generates minimal heat compared with mechanical drives. Sequential reads reach 560 MB/s and writes 510 MB/s while drawing only the power required by the SATA interface. Power-loss data protection helps preserve in-flight writes during unexpected shutdowns.
Hot-swap tray simplifies daily drive changes
The supplied G14 tray fits 2.5 inch bays in Dell PowerEdge R-Series servers from generations 14 through 17, including models such as R640, R740, R650, R750, R660, R760, R670 and R770. Hot-swap capability allows removal or insertion without powering down the chassis. The SATA connector limits use to systems with SATA backplanes or controllers.
Pontos fortes
- 960 GB capacity stores large datasets
- 560 MB/s read speed accelerates data access
- 510 MB/s write speed handles heavy write workloads
- 3 DWPD endurance rating supports mixed-use applications
- Hot-swappable design enables drive replacement without downtime
Especificações
| Brand | Dell |
|---|---|
| Series | Generation 14 |
| Model | 0X31G3 |
| Form Factor | 2.5" |
| Capacity | 960GB |
| Interface | SATA III |
| Sustained Sequential Read | 560 MB/s |
| Sustained Sequential Write | 510 MB/s |
| Endurance | 3 DWPD |
| Features | Hot Swappable |
Perguntas sobre este artigo
How do I install the 0X31G3 into a Dell PowerEdge R740 and what step is often missed?
Slide the supplied G14 tray DXD9H into any 2.5-inch hot-swap bay until the latch clicks; the step often missed is fully engaging the latch so the SATA connector seats securely.
What maintenance or replacement will the 0X31G3 need over its service life?
The 3 DWPD endurance rating means the 3D TLC NAND is warrantied for three full drive writes per day; plan replacement once the SMART wear indicator approaches the rated limit.
What performance limit appears first when the 0X31G3 runs sustained writes?
Sequential write throughput caps at 510 MB/s, so the SATA 6Gb/s interface saturates before the controller or NAND becomes the bottleneck.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
