نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

DELL

DELL 4VMHH 1.2TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-CA1G-84VWG

A 1.2TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12Gb/s interface, hot-swap tray, and Dell part number 4VMHH

  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Form Factor2.5"
  • 2 TB capacity for dense data storage
  • 10 000 RPM spindle for rapid read access
  • SAS 12 Gb/s interface for high-throughput transfers
  • 5 inch form factor fits compact drive bays
  • Hot-swap tray enables drive changes without downtime

Dell 4VMHH 1.2TB SAS Drive

This Dell 4VMHH is a new 1.2TB internal hard drive with a 2.5 inch form factor. It connects through a SAS interface running at 12Gb/s and spins at 10000 RPM. The unit supports hot-swap tray installation for compatible Dell systems.

Suited For Dell Server Bays

It fits administrators who need a direct Dell part-number replacement for existing 2.5 inch SAS bays. Buyers who require a different capacity or a non-hot-swap form factor should look at something else.

12Gb/s SAS Interface Decides Fit

The single specification that determines compatibility is the 12Gb/s SAS interface. The host backplane and controller must support this exact signalling rate and protocol for the drive to operate correctly.

أبرز المميزات

  • 2 TB capacity for dense data storage
  • 10 000 RPM spindle for rapid read access
  • SAS 12 Gb/s interface for high-throughput transfers
  • 5 inch form factor fits compact drive bays
  • Hot-swap tray enables drive changes without downtime

المواصفات

BrandDell
Model4VMHH
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
Form Factor2.5"

أسئلة حول هذا المنتج

Does the 2.5" form factor fit a standard 3.5" drive bay without an adapter?

The drive is a 2.5" form factor and requires a 2.5" bay or a compatible mounting bracket for a 3.5" slot.

How is the hot-swap tray installed and what step is often missed?

Slide the drive into the SAS backplane until the connector seats firmly; the lever must click fully closed to lock it.

When will the 10000 RPM spindle motor need replacement?

Enterprise SAS drives are rated for continuous operation; replace the unit if SMART data shows reallocated sectors or bearing noise.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.