We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 2.5 inch silver hard drive with hot-swap tray and SAS connector

DELL

DELL 4VMHH 1.2TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-CA1G-84VWG

A 1.2TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12Gb/s interface, hot-swap tray, and Dell part number 4VMHH

  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Form Factor2.5"
  • 2 TB capacity for dense data storage
  • 10 000 RPM spindle for rapid read access
  • SAS 12 Gb/s interface for high-throughput transfers
  • 5 inch form factor fits compact drive bays
  • Hot-swap tray enables drive changes without downtime

Dell 4VMHH 1.2TB SAS Drive

This Dell 4VMHH is a new 1.2TB internal hard drive with a 2.5 inch form factor. It connects through a SAS interface running at 12Gb/s and spins at 10000 RPM. The unit supports hot-swap tray installation for compatible Dell systems.

Suited For Dell Server Bays

It fits administrators who need a direct Dell part-number replacement for existing 2.5 inch SAS bays. Buyers who require a different capacity or a non-hot-swap form factor should look at something else.

12Gb/s SAS Interface Decides Fit

The single specification that determines compatibility is the 12Gb/s SAS interface. The host backplane and controller must support this exact signalling rate and protocol for the drive to operate correctly.

Highlights

  • 2 TB capacity for dense data storage
  • 10 000 RPM spindle for rapid read access
  • SAS 12 Gb/s interface for high-throughput transfers
  • 5 inch form factor fits compact drive bays
  • Hot-swap tray enables drive changes without downtime

Specifications

BrandDell
Model4VMHH
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
Form Factor2.5"

Questions about this item

Does the 2.5" form factor fit a standard 3.5" drive bay without an adapter?

The drive is a 2.5" form factor and requires a 2.5" bay or a compatible mounting bracket for a 3.5" slot.

How is the hot-swap tray installed and what step is often missed?

Slide the drive into the SAS backplane until the connector seats firmly; the lever must click fully closed to lock it.

When will the 10000 RPM spindle motor need replacement?

Enterprise SAS drives are rated for continuous operation; replace the unit if SMART data shows reallocated sectors or bearing noise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.