نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

DELL

DELL 600GB 10K RPM SAS 2.5" HD R72NV internal hard drive

SKU CH-B0XF-E039G

A 600 GB 10K RPM SAS 2.5" hard drive with tray for Dell PowerEdge and PowerVault servers

  • 600 GB capacity supports demanding server workloads
  • 10 000 RPM spindle speed reduces data access latency
  • SAS 6 Gb/s interface enables fast host communication
  • 5 inch form factor fits dense drive bays
  • Compatible with PowerEdge and PowerVault arrays

Dell 600 GB 10K SAS drive

This Dell 600 GB 10K RPM SAS 2.5-inch hard drive ships new with a factory-fitted tray. It carries Dell firmware validated across a wide range of PowerEdge servers and MD storage arrays for immediate hot-swap deployment.

Suits Dell PowerEdge and MD arrays

The drive fits PowerEdge tower, rack and blade models including T310, T320, R620, R720, M620 and MD1220 enclosures. Buyers needing a different capacity, a non-SAS interface or compatibility with non-Dell platforms should consider other options.

SAS 6 Gb/s interface decides fit

The single specification that determines suitability is the SAS 6 Gb/s connection; the host backplane must support this exact signalling rate and Dell firmware handshake for the drive to function correctly.

أبرز المميزات

  • 600 GB capacity supports demanding server workloads
  • 10 000 RPM spindle speed reduces data access latency
  • SAS 6 Gb/s interface enables fast host communication
  • 5 inch form factor fits dense drive bays
  • Compatible with PowerEdge and PowerVault arrays

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

How much heat and noise does the 10K RPM SAS drive produce when running continuously in a server?

The 10K RPM spindle speed generates more heat and acoustic output than slower near-line drives; ensure the server chassis has adequate airflow and that the drive tray vents are not obstructed.

What hardware must already be present for this 2.5" SAS drive to function?

A 2.5" hot-swap bay with a SAS backplane or a SAS HBA/RAID controller and the matching Dell drive tray are required; the tray is included with this kit.

Can the 600GB SAS drive operate in a PowerEdge R610 alongside older SAS drives?

Yes, the drive uses the standard SAS interface and Dell firmware compatible with the R610, so it will work in the same array or as a standalone volume with existing SAS drives.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.