暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL 600GB 10K RPM SAS 2.5" HD R72NV internal hard drive

SKU CH-B0XF-E039G

A 600 GB 10K RPM SAS 2.5" hard drive with tray for Dell PowerEdge and PowerVault servers

  • 600 GB capacity supports demanding server workloads
  • 10 000 RPM spindle speed reduces data access latency
  • SAS 6 Gb/s interface enables fast host communication
  • 5 inch form factor fits dense drive bays
  • Compatible with PowerEdge and PowerVault arrays

Dell 600 GB 10K SAS drive

This Dell 600 GB 10K RPM SAS 2.5-inch hard drive ships new with a factory-fitted tray. It carries Dell firmware validated across a wide range of PowerEdge servers and MD storage arrays for immediate hot-swap deployment.

Suits Dell PowerEdge and MD arrays

The drive fits PowerEdge tower, rack and blade models including T310, T320, R620, R720, M620 and MD1220 enclosures. Buyers needing a different capacity, a non-SAS interface or compatibility with non-Dell platforms should consider other options.

SAS 6 Gb/s interface decides fit

The single specification that determines suitability is the SAS 6 Gb/s connection; the host backplane must support this exact signalling rate and Dell firmware handshake for the drive to function correctly.

特長

  • 600 GB capacity supports demanding server workloads
  • 10 000 RPM spindle speed reduces data access latency
  • SAS 6 Gb/s interface enables fast host communication
  • 5 inch form factor fits dense drive bays
  • Compatible with PowerEdge and PowerVault arrays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much heat and noise does the 10K RPM SAS drive produce when running continuously in a server?

The 10K RPM spindle speed generates more heat and acoustic output than slower near-line drives; ensure the server chassis has adequate airflow and that the drive tray vents are not obstructed.

What hardware must already be present for this 2.5" SAS drive to function?

A 2.5" hot-swap bay with a SAS backplane or a SAS HBA/RAID controller and the matching Dell drive tray are required; the tray is included with this kit.

Can the 600GB SAS drive operate in a PowerEdge R610 alongside older SAS drives?

Yes, the drive uses the standard SAS interface and Dell firmware compatible with the R610, so it will work in the same array or as a standalone volume with existing SAS drives.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。