نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

DELL

DELL 8 TB 3.5" SAS 12Gb/s 7.2K 512E internal hard drive

SKU CH-9Y03-TSYQP

8 TB 3.5" SAS 12Gb/s 7.2K 512E internal hard drive for desktop storage

  • 8 TB capacity stores large datasets
  • 12 Gb/s SAS interface enables fast data transfer
  • 2 K RPM spindle speed supports steady throughput
  • 512E sector format ensures broad system compatibility
  • 5-inch hot-plug design allows drive swaps without downtime

Dell 8 TB SAS 12Gb/s drive

This Dell 8 TB hard drive uses a 3.5 inch form factor and a SAS 12Gb/s interface. It spins at 7.2K RPM and employs a 512E sector format. The unit is supplied as a customer kit with hot-plug capability.

Suitable for bulk storage in compatible SAS bays

This drive fits servers or storage arrays that accept 3.5 inch SAS hot-plug devices and need high-capacity sequential throughput. Buyers whose chassis only support 2.5 inch bays or a different physical interface cannot use this unit.

SAS 12Gb/s interface

The single specification that decides compatibility is the SAS 12Gb/s interface. The system backplane and controller must support this exact protocol for the drive to function.

أبرز المميزات

  • 8 TB capacity stores large datasets
  • 12 Gb/s SAS interface enables fast data transfer
  • 2 K RPM spindle speed supports steady throughput
  • 512E sector format ensures broad system compatibility
  • 5-inch hot-plug design allows drive swaps without downtime

المواصفات

BrandDell

أسئلة حول هذا المنتج

What practical throughput does the SAS 12Gb/s interface cap at?

The SAS 12Gb/s link supports up to 12 Gb/s signalling; real-world sustained transfer will be limited by the 7.2K rotational speed and 512E formatting.

What drive bay and mounting style does the 3.5-inch hot-plug kit require?

It fits a standard 3.5-inch hot-plug bay with the carrier supplied in the customer kit; no separate screws or rails are needed.

How is the drive installed, and which step is commonly missed?

Slide the carrier into the hot-plug bay until the latch clicks; the step often missed is verifying the SAS connector is fully seated before locking the lever.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.