نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black plastic filler bezel for Dell PowerEdge T310 T410 3.5 inch drive bay

DELL

DELL PowerEdge T310 T410 3.5" Drive Bay Filler Cover Bezel D313K

SKU CH-4VE0-0RR8Z

A snap-in 3.5" drive bay filler cover that seals unused front slots on Dell PowerEdge T310 and T410 servers to maintain airflow and block dust

  • Compatible ManufacturerFor Dell
  • Compatible ModelsFor Dell PowerEdge T310, PowerEdge T410
  • Dimensions(L x W x H): 5.87" x 0.71" x 1.63"
  • Weight0.10 lbs
  • Seals unused 3.5" bays to maintain server airflow
  • Blocks dust and debris from entering the chassis
  • Snaps securely into place without any tools required
  • Matches the factory bezel on PowerEdge T310 and T410
  • Moulded from durable ABS plastic for long service life

Dell PowerEdge T310 T410 3.5" Bay Filler

This new filler cover fits Dell PowerEdge T310 and T410 servers. It occupies a vacant 3.5 inch drive bay slot where a DVD drive would sit. The part is made from durable ABS plastic with a matte black finish. It helps maintain a clean, professional front appearance.

Part Number D313K Ensures Correct Fit

The single specification that decides compatibility is the Dell part number D313K, also referenced as 0D313K. This cover is engineered specifically for the PowerEdge T310 and T410 chassis front bezels. No other server models are supported by this part number. Verify the part number on your existing bezel or service tag before ordering.

Snap-In Design Requires No Tools

Installation is tool-free; the cover snaps securely into the empty 3.5 inch bay opening. It locks firmly to prevent accidental dislodging during transport or vibration. By sealing the unused slot, it preserves front-to-rear airflow dynamics and reduces dust ingress. The cover adds negligible weight at 0.10 lbs and measures 5.87 x 0.71 x 1.63 inches.

أبرز المميزات

  • Seals unused 3.5" bays to maintain server airflow
  • Blocks dust and debris from entering the chassis
  • Snaps securely into place without any tools required
  • Matches the factory bezel on PowerEdge T310 and T410
  • Moulded from durable ABS plastic for long service life

المواصفات

BrandDell
Part NumberD313K
Compatible ManufacturerFor Dell
Compatible ModelsFor Dell PowerEdge T310, PowerEdge T410
Dimensions(L x W x H): 5.87" x 0.71" x 1.63"
Weight0.10 lbs

أسئلة حول هذا المنتج

How does the 3.5" filler cover affect airflow inside a PowerEdge T310 or T410?

It seals the empty optical-drive bay so front-to-rear airflow follows the designed path instead of leaking through the opening, keeping cooling efficiency intact.

Does the D313K bezel snap into a standard 3.5" drive bay without screws?

Yes, the ABS plastic cover uses a tool-free snap-in design that locks securely into the front slot of a PowerEdge T310 or T410.

What are the exact dimensions of the D313K cover to confirm it fits my server front panel?

The cover measures 5.87" long, 0.71" wide and 1.63" high, matching the factory bezel cutout on PowerEdge T310 and T410 models.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.