暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black plastic filler bezel for Dell PowerEdge T310 T410 3.5 inch drive bay

DELL

DELL PowerEdge T310 T410 3.5" Drive Bay Filler Cover Bezel D313K

SKU CH-4VE0-0RR8Z

A snap-in 3.5" drive bay filler cover that seals unused front slots on Dell PowerEdge T310 and T410 servers to maintain airflow and block dust

  • Compatible ManufacturerFor Dell
  • Compatible ModelsFor Dell PowerEdge T310, PowerEdge T410
  • Dimensions(L x W x H): 5.87" x 0.71" x 1.63"
  • Weight0.10 lbs
  • Seals unused 3.5" bays to maintain server airflow
  • Blocks dust and debris from entering the chassis
  • Snaps securely into place without any tools required
  • Matches the factory bezel on PowerEdge T310 and T410
  • Moulded from durable ABS plastic for long service life

Dell PowerEdge T310 T410 3.5" Bay Filler

This new filler cover fits Dell PowerEdge T310 and T410 servers. It occupies a vacant 3.5 inch drive bay slot where a DVD drive would sit. The part is made from durable ABS plastic with a matte black finish. It helps maintain a clean, professional front appearance.

Part Number D313K Ensures Correct Fit

The single specification that decides compatibility is the Dell part number D313K, also referenced as 0D313K. This cover is engineered specifically for the PowerEdge T310 and T410 chassis front bezels. No other server models are supported by this part number. Verify the part number on your existing bezel or service tag before ordering.

Snap-In Design Requires No Tools

Installation is tool-free; the cover snaps securely into the empty 3.5 inch bay opening. It locks firmly to prevent accidental dislodging during transport or vibration. By sealing the unused slot, it preserves front-to-rear airflow dynamics and reduces dust ingress. The cover adds negligible weight at 0.10 lbs and measures 5.87 x 0.71 x 1.63 inches.

特長

  • Seals unused 3.5" bays to maintain server airflow
  • Blocks dust and debris from entering the chassis
  • Snaps securely into place without any tools required
  • Matches the factory bezel on PowerEdge T310 and T410
  • Moulded from durable ABS plastic for long service life

仕様

BrandDell
Part NumberD313K
Compatible ManufacturerFor Dell
Compatible ModelsFor Dell PowerEdge T310, PowerEdge T410
Dimensions(L x W x H): 5.87" x 0.71" x 1.63"
Weight0.10 lbs

この商品に関する質問

How does the 3.5" filler cover affect airflow inside a PowerEdge T310 or T410?

It seals the empty optical-drive bay so front-to-rear airflow follows the designed path instead of leaking through the opening, keeping cooling efficiency intact.

Does the D313K bezel snap into a standard 3.5" drive bay without screws?

Yes, the ABS plastic cover uses a tool-free snap-in design that locks securely into the front slot of a PowerEdge T310 or T410.

What are the exact dimensions of the D313K cover to confirm it fits my server front panel?

The cover measures 5.87" long, 0.71" wide and 1.63" high, matching the factory bezel cutout on PowerEdge T310 and T410 models.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。