DELL
DELL ST3000NM0023Product 3TB 3.5" SAS 7200 RPM internal hard drive
A 3 TB, 3.5-inch internal hard drive with a SAS 6Gb/s interface spinning at 7200 RPM for Dell EMC PowerVault MD32XX and MD36XX storage systems
- InterfaceSAS 6Gb/s
- Capacity3TB
- NAND Flash Memory TypeSLC
- RPM7200 RPM
- Form Factor3.5"
- 3 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive data access
- SAS 6Gb/s interface enables reliable server connectivity
- 5 inch form factor fits standard drive bays
- Dell part 55H49 ensures compatibility with PowerVault MD32XX and MD36XX systems
Dell 3TB SAS Hard Drive
This Dell-branded 3.5-inch internal hard drive delivers 3TB of capacity over a SAS 6Gb/s interface spinning at 7200 RPM. It carries the original Dell part number 55H49 and is supplied new in retail or OEM packaging.
Suited for PowerVault storage arrays
The drive is qualified for Dell EMC PowerVault MD32XX and MD36XX systems where a 3TB 7.2K SAS spindle is required. Builders needing a different interface, a larger capacity or a non-Dell firmware should look elsewhere.
SAS 6Gb/s interface
The single specification that determines fit is the 6Gb/s SAS connection; the drive will only operate in backplanes and controllers that support this exact interface standard.
أبرز المميزات
- 3 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive data access
- SAS 6Gb/s interface enables reliable server connectivity
- 5 inch form factor fits standard drive bays
- Dell part 55H49 ensures compatibility with PowerVault MD32XX and MD36XX systems
المواصفات
| Brand | Dell |
|---|---|
| Model | 55H49 |
| Interface | SAS 6Gb/s |
| Capacity | 3TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
أسئلة حول هذا المنتج
Does this 3.5" SAS drive fit a standard 3.5-inch internal bay?
Yes, the 3.5-inch form factor matches a standard 3.5-inch internal drive bay in compatible Dell EMC PowerVault MD32XX and MD36XX storage systems.
How is the SAS 6Gb/s interface connected during installation, and what step is often missed?
Connect the SAS data and power cables to the drive and the controller; the step often missed is confirming the backplane or controller port is configured for 6Gb/s SAS rather than a slower link speed.
When will this 7200 RPM mechanical drive typically need replacement?
As a mechanical hard drive with a 7200 RPM spindle, it will eventually require replacement when SMART attributes indicate wear or after the rated workload limit for the storage system is reached.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



