暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL ST3000NM0023Product 3TB 3.5" SAS 7200 RPM internal hard drive

SKU CH-ZYKG-SFZFW MPN ST3000NM0023Product

A 3 TB, 3.5-inch internal hard drive with a SAS 6Gb/s interface spinning at 7200 RPM for Dell EMC PowerVault MD32XX and MD36XX storage systems

  • InterfaceSAS 6Gb/s
  • Capacity3TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Form Factor3.5"
  • 3 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SAS 6Gb/s interface enables reliable server connectivity
  • 5 inch form factor fits standard drive bays
  • Dell part 55H49 ensures compatibility with PowerVault MD32XX and MD36XX systems

Dell 3TB SAS Hard Drive

This Dell-branded 3.5-inch internal hard drive delivers 3TB of capacity over a SAS 6Gb/s interface spinning at 7200 RPM. It carries the original Dell part number 55H49 and is supplied new in retail or OEM packaging.

Suited for PowerVault storage arrays

The drive is qualified for Dell EMC PowerVault MD32XX and MD36XX systems where a 3TB 7.2K SAS spindle is required. Builders needing a different interface, a larger capacity or a non-Dell firmware should look elsewhere.

SAS 6Gb/s interface

The single specification that determines fit is the 6Gb/s SAS connection; the drive will only operate in backplanes and controllers that support this exact interface standard.

特長

  • 3 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SAS 6Gb/s interface enables reliable server connectivity
  • 5 inch form factor fits standard drive bays
  • Dell part 55H49 ensures compatibility with PowerVault MD32XX and MD36XX systems

仕様

BrandDell
Model55H49
InterfaceSAS 6Gb/s
Capacity3TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

Does this 3.5" SAS drive fit a standard 3.5-inch internal bay?

Yes, the 3.5-inch form factor matches a standard 3.5-inch internal drive bay in compatible Dell EMC PowerVault MD32XX and MD36XX storage systems.

How is the SAS 6Gb/s interface connected during installation, and what step is often missed?

Connect the SAS data and power cables to the drive and the controller; the step often missed is confirming the backplane or controller port is configured for 6Gb/s SAS rather than a slower link speed.

When will this 7200 RPM mechanical drive typically need replacement?

As a mechanical hard drive with a 7200 RPM spindle, it will eventually require replacement when SMART attributes indicate wear or after the rated workload limit for the storage system is reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。