نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Dynatron J12 copper heatsink with aluminum fins and fan for Socket SP5

Dynatron

Dynatron J12 CPU cooler Socket SP5 320W TDP

SKU CH-WZGV-9WGWA MPN J12

Socket SP5 air cooler with copper heatpipes and pre-applied Shin-Etsu 7762 grease, rated for 320W TDP in 2U servers

  • TypeFan & Heatsinks
  • Supports AMD Genoa Socket SP5 processors
  • Handles up to 320W TDP thermal load
  • Copper heat spreader with aluminum base transfers heat efficiently
  • Pre-applied Shin-Etsu 7762 thermal grease simplifies installation
  • Compact 4.7 x 3.6 x 4.1 inch footprint fits 2U servers

AMD Genoa SP5 320W cooler

The Dynatron J12 is an active air cooler built for AMD Genoa processors on the SP5 socket. It uses heatpipes with an aluminium fin stack and a copper heat spreader on an aluminium base to handle up to 320W TDP. The unit fits 2U server chassis and taller enclosures. Shin-Etsu 7762 thermal grease comes pre-applied on the cold plate.

2U clearance with pre-applied paste

Installation follows the standard SP5 mounting pattern used in 2U and larger servers. The pre-applied Shin-Etsu 7762 compound removes the need for separate paste application and reduces the risk of uneven coverage. Builders must verify that the 4.7 by 3.6 by 4.1 inch envelope clears memory modules, VRM heatsinks and chassis side panels in their specific system.

Sustained 320W dissipation in server airflow

Under continuous load the copper spreader and heatpipe array move heat into the aluminium fin stack where forced airflow from system fans carries it away. The cooler is rated for 320W TDP in environments that maintain front-to-rear airflow typical of rack servers. Systems with restricted airflow or lower fan speeds will see higher steady-state temperatures. Buyers needing liquid cooling or support for sockets other than SP5 should look elsewhere.

أبرز المميزات

  • Supports AMD Genoa Socket SP5 processors
  • Handles up to 320W TDP thermal load
  • Copper heat spreader with aluminum base transfers heat efficiently
  • Pre-applied Shin-Etsu 7762 thermal grease simplifies installation
  • Compact 4.7 x 3.6 x 4.1 inch footprint fits 2U servers

المواصفات

TypeFan & Heatsinks
وزن الشحنة0.91 kg
أبعاد الطرد152 × 140 × 114 mm

أسئلة حول هذا المنتج

How do I verify the Dynatron J12 is cooling my AMD Genoa processor correctly after installation?

Monitor CPU temperatures under load using system monitoring software; the cooler is rated for 320W TDP so temperatures should remain within the processor's specified limits during sustained workloads.

What components are included with the Dynatron J12 and is any additional thermal paste required?

The package includes the copper heatpipe heatsink with aluminum fin stack and pre-applied Shin-Etsu 7762 thermal grease on the base, so no separate thermal compound is needed for initial installation.

Which Dynatron J12 variant should I select for a 2U server build with an SP5 socket CPU?

The J12 model is designed for 2U and taller server chassis, supports Socket SP5 processors up to 320W TDP, and measures 4.7 x 3.6 x 4.1 inches to fit standard 2U clearance.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.