نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black PLA filament spool, 1.75mm diameter, vacuum-sealed with desiccant

Electronix Express

Electronix Express Black PLA Filament 1.75mm ±0.02mm 1kg Spool

SKU CH-JWR4-HWKED

Black PLA filament on a 1 kg spool with 1.75 mm diameter and ±0.02 mm tolerance for consistent extrusion and strong layer bonding

  • ColorBlack
  • Consistent extrusion from ±0.02mm diameter tolerance
  • Strong, reliable prints with high-purity, low-shrinkage PLA
  • Ready-to-print filament sealed in vacuum bag with desiccant
  • Broad printer compatibility with standard 1.75mm diameter
  • 320 metres of material on a 1kg spool

Black PLA Filament 1.75mm

This 1kg spool of black PLA filament feeds at 1.75mm diameter with a tolerance of ±0.02mm. It suits almost any fused-deposition printer and delivers consistent extrusion for reliable parts. The material is high purity with low shrinkage and strong layer bonding. Vacuum sealing with desiccant keeps the filament dry until opened.

Diameter Tolerance ±0.02mm

The tight ±0.02mm variance controls filament flow so each layer matches the slicer path. Consistent diameter prevents under-extrusion, nozzle clogs and dimensional errors on functional prints. It also reduces the need for frequent flow-rate calibration. This single figure decides whether the spool will work on a printer that demands precise feedstock.

Vacuum-Sealed Spool with Desiccant

The sealed bag and desiccant packet block moisture absorption during storage and shipping. Dry filament prints with fewer bubbles, better surface finish and stronger inter-layer adhesion. It also eliminates the need to pre-dry the spool before the first print. The packaging extends shelf life for users who keep filament on hand.

أبرز المميزات

  • Consistent extrusion from ±0.02mm diameter tolerance
  • Strong, reliable prints with high-purity, low-shrinkage PLA
  • Ready-to-print filament sealed in vacuum bag with desiccant
  • Broad printer compatibility with standard 1.75mm diameter
  • 320 metres of material on a 1kg spool

المواصفات

ColorBlack

أسئلة حول هذا المنتج

How does the ±0.02 mm diameter tolerance affect print quality on my machine?

The tight tolerance keeps extrusion steady so layers bond cleanly and dimensions stay accurate across the 320 m spool.

What nozzle temperature range does this PLA need and what happens if I go outside it?

Print between 200 and 230 °C; lower temps risk under-extrusion while higher temps can cause stringing or oozing.

Will the 1 kg spool fit on my printer's standard holder?

The spool weighs 1.17 kg with filament and measures 1.75 mm diameter; most desktop holders accept this size and weight.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.