暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black PLA filament spool, 1.75mm diameter, vacuum-sealed with desiccant

Electronix Express

Electronix Express Black PLA Filament 1.75mm ±0.02mm 1kg Spool

SKU CH-JWR4-HWKED

Black PLA filament on a 1 kg spool with 1.75 mm diameter and ±0.02 mm tolerance for consistent extrusion and strong layer bonding

  • ColorBlack
  • Consistent extrusion from ±0.02mm diameter tolerance
  • Strong, reliable prints with high-purity, low-shrinkage PLA
  • Ready-to-print filament sealed in vacuum bag with desiccant
  • Broad printer compatibility with standard 1.75mm diameter
  • 320 metres of material on a 1kg spool

Black PLA Filament 1.75mm

This 1kg spool of black PLA filament feeds at 1.75mm diameter with a tolerance of ±0.02mm. It suits almost any fused-deposition printer and delivers consistent extrusion for reliable parts. The material is high purity with low shrinkage and strong layer bonding. Vacuum sealing with desiccant keeps the filament dry until opened.

Diameter Tolerance ±0.02mm

The tight ±0.02mm variance controls filament flow so each layer matches the slicer path. Consistent diameter prevents under-extrusion, nozzle clogs and dimensional errors on functional prints. It also reduces the need for frequent flow-rate calibration. This single figure decides whether the spool will work on a printer that demands precise feedstock.

Vacuum-Sealed Spool with Desiccant

The sealed bag and desiccant packet block moisture absorption during storage and shipping. Dry filament prints with fewer bubbles, better surface finish and stronger inter-layer adhesion. It also eliminates the need to pre-dry the spool before the first print. The packaging extends shelf life for users who keep filament on hand.

特長

  • Consistent extrusion from ±0.02mm diameter tolerance
  • Strong, reliable prints with high-purity, low-shrinkage PLA
  • Ready-to-print filament sealed in vacuum bag with desiccant
  • Broad printer compatibility with standard 1.75mm diameter
  • 320 metres of material on a 1kg spool

仕様

ColorBlack

この商品に関する質問

How does the ±0.02 mm diameter tolerance affect print quality on my machine?

The tight tolerance keeps extrusion steady so layers bond cleanly and dimensions stay accurate across the 320 m spool.

What nozzle temperature range does this PLA need and what happens if I go outside it?

Print between 200 and 230 °C; lower temps risk under-extrusion while higher temps can cause stringing or oozing.

Will the 1 kg spool fit on my printer's standard holder?

The spool weighs 1.17 kg with filament and measures 1.75 mm diameter; most desktop holders accept this size and weight.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。