نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 3.5 inch SATA hard drive in anti-static bag

Epoch

Epoch 400-BLLE 6T6TD 8TB 7200RPM SATA 3.5" Internal Hard Drive Replacement Kit

SKU CH-JZ3Q-AQA51

An 8 TB, 7200 RPM SATA hard drive in a 3.5-inch form factor supplied as a replacement kit for Dell PowerEdge 14 and 15 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • SATA 6 Gb/s interface fits existing backplanes
  • 5 inch form factor matches standard drive bays
  • Validated across 14 G and 15 G Dell PowerEdge servers

Purpose-Built Server Storage

The Epoch 400-BLLE 6T6TD is an 8 TB 3.5-inch SATA hard drive rotating at 7200 RPM. It ships as a replacement kit validated for Dell PowerEdge 14 and 15 Generation rack and tower servers. Enterprise buyers receive a drive tested for continuous operation in multi-bay arrays.

Compatibility Scope

This kit suits administrators expanding or repairing the listed Dell PowerEdge R and T series platforms. Environments that require a different interface, a smaller form factor, or a lower spindle speed should select an alternative drive.

Decisive Specification

The 7200 RPM spindle speed determines sustained transfer rates for sequential workloads. Verify that the target server bay accepts a 3.5-inch SATA device before ordering.

أبرز المميزات

  • 8 TB capacity stores large server datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • SATA 6 Gb/s interface fits existing backplanes
  • 5 inch form factor matches standard drive bays
  • Validated across 14 G and 15 G Dell PowerEdge servers

المواصفات

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

أسئلة حول هذا المنتج

Does the 3.5" drive fit the standard drive bays in Dell PowerEdge 14G and 15G servers?

Yes, the 3.5-inch form factor matches the hot-swap bays in the listed PowerEdge 14G and 15G rack and tower models.

What installation step is often missed when adding this SATA drive to a Dell server?

The drive must be seated in the supplied carrier so the SATA connector aligns with the backplane; inserting the bare drive without the carrier will not connect.

When should the 8TB 7200RPM drive be replaced in a server running continuous workloads?

Plan replacement after the manufacturer-rated service life or at the first sign of SMART reallocated-sector growth to avoid array degradation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.