FANXIANG S101Q 256GB SATA 2.5" internal SSD
- Internal Solid Stat…
- Consumer
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
FANXIANG
A 2.5-inch SATA drive with 512 GB capacity, QLC 3D NAND and SLC cache delivering up to 560 MB/s reads and 490 MB/s writes for faster boot and application loading
The FANXIANG S101Q is a 512GB internal solid state drive built in a 2.5 inch form factor with a SATA III interface. It uses 3D NAND QLC flash and an SLC cache to deliver sequential reads up to 560 MBps and writes up to 490 MBps. The drive measures 7.00mm in height and 70.00mm in width, fitting standard 2.5 inch bays in laptops and desktops.
Ideal for users replacing a mechanical hard drive in a SATA-based laptop or desktop who want faster boot, app load and file transfer. The drive supports garbage collection, wear-levelling, ECC, TRIM and S.M.A.R.T. for reliability, and is rated for 160TB written with a 1,500,000 hour MTBF. It is not suited for workloads that demand sustained high write throughput or the lower latency of a PCIe-attached drive.
The SATA III 6Gb/s interface caps maximum throughput at the SATA bus limit, so the 560 MBps read and 490 MBps write figures are the ceiling for this drive. If your system has a 2.5 inch SATA bay and you need a simple drop-in upgrade from a hard drive, the interface matches; if your motherboard offers an M.2 PCIe slot, a different drive type would be required to exceed these speeds.
| Brand | FANXIANG |
|---|---|
| Series | S101Q |
| Model | S101Q |
| Part Number | S101Q-512GB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 512GB |
| Memory Components | QLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 490 MBps |
| Terabytes Written (TBW) | 160TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Features | 2.5 Inches SATA SSD Internal SSD 512GB |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +85°C |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.00mm |
| Weight | 45g |
| Package Content | 1 x 2.5" SATA SSD |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The drive itself is supplied; a SATA data cable and any 2.5" mounting bracket or caddy required by your chassis are not included and must be sourced separately.
The 512GB capacity delivers 560 MB/s read and 490 MB/s write with 160 TBW endurance, a practical balance for an OS drive plus everyday applications.
In a SATA III 6 Gb/s slot you will see sequential reads near 560 MB/s and writes near 490 MB/s; real-world boot and app-load times are limited by the SATA interface ceiling.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟