FANXIANG S101Q 256GB SATA 2.5" internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
FANXIANG
A 2.5-inch SATA drive with 512 GB capacity, QLC 3D NAND and SLC cache delivering up to 560 MB/s reads and 490 MB/s writes for faster boot and application loading
The FANXIANG S101Q is a 512GB internal solid state drive built in a 2.5 inch form factor with a SATA III interface. It uses 3D NAND QLC flash and an SLC cache to deliver sequential reads up to 560 MBps and writes up to 490 MBps. The drive measures 7.00mm in height and 70.00mm in width, fitting standard 2.5 inch bays in laptops and desktops.
Ideal for users replacing a mechanical hard drive in a SATA-based laptop or desktop who want faster boot, app load and file transfer. The drive supports garbage collection, wear-levelling, ECC, TRIM and S.M.A.R.T. for reliability, and is rated for 160TB written with a 1,500,000 hour MTBF. It is not suited for workloads that demand sustained high write throughput or the lower latency of a PCIe-attached drive.
The SATA III 6Gb/s interface caps maximum throughput at the SATA bus limit, so the 560 MBps read and 490 MBps write figures are the ceiling for this drive. If your system has a 2.5 inch SATA bay and you need a simple drop-in upgrade from a hard drive, the interface matches; if your motherboard offers an M.2 PCIe slot, a different drive type would be required to exceed these speeds.
| Brand | FANXIANG |
|---|---|
| Series | S101Q |
| Model | S101Q |
| Part Number | S101Q-512GB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 512GB |
| Memory Components | QLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 490 MBps |
| Terabytes Written (TBW) | 160TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Features | 2.5 Inches SATA SSD Internal SSD 512GB |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +85°C |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.00mm |
| Weight | 45g |
| Package Content | 1 x 2.5" SATA SSD |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The drive itself is supplied; a SATA data cable and any 2.5" mounting bracket or caddy required by your chassis are not included and must be sourced separately.
The 512GB capacity delivers 560 MB/s read and 490 MB/s write with 160 TBW endurance, a practical balance for an OS drive plus everyday applications.
In a SATA III 6 Gb/s slot you will see sequential reads near 560 MB/s and writes near 490 MB/s; real-world boot and app-load times are limited by the SATA interface ceiling.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?