EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Fractal Design
ATX mid-tower with genuine blackened oak front panel, three included Momentum 12 fans, front USB Type-C 20 Gbps, and support for 355 mm GPUs or 360 mm front radiators
The Fractal Design North Momentum Edition Black is an ATX mid-tower case built around a steel chassis with a genuine blackened oak front panel and a glass side panel. It ships with three 120 mm Momentum fans installed at the front for immediate airflow. The case accepts ATX, mATX and Mini-ITX motherboards and holds two 3.5" and two 2.5" drives.
Three front Momentum 12 fans feed cool air directly to the GPU and CPU area while top and rear mounts provide exhaust paths. A front radiator up to 360 mm or a top radiator up to 240 mm can be fitted for liquid cooling under continuous load. Dust filters on the front, bottom and top trap particulates without choking flow during long sessions.
Tool-less removal of the top, front and side panels simplifies component access and later upgrades. The front I/O includes two USB Type-A 20 Gbps ports, one USB Type-C 20 Gbps port, an audio jack and a microphone jack. Builders should verify GPU length against the 355 mm limit, or 300 mm when a front radiator is used, and check CPU cooler height against the 170 mm maximum.
| Brand | Fractal Design |
|---|---|
| Series | North Momentum Edition |
| Model | FD-C-NOR1C-05 |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | Steel |
| With Power Supply | No |
| Power Supply | ATX |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / mATX / Mini-ITX |
| Side Panel | Yes |
| LED | No |
| Dust Filters | Front (nylon) PSU/Bottom (nylon) Top (steel) |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Front Ports | 2 x USB Type-A 20 Gbps , 1 x USB Type-C 20 Gbps, 1 x Audio jack, 1 x Microphone jack |
| Fan Options | Total fan mounts: 6 x 120 mm or 4 x 140 mm Front: 3 x 120 mm or 2 x 140 mm (3 x Momentum 12 Included) Top: 2 x 120 mm or 2 x 140 mm Rear: 1x 120 mm |
| Radiator Options | Front: Up to 360 mm Top: Up to 240 mm (See manual for RAM clearance) Rear: 120 mm |
| Max GPU Length | 355 mm |
| Max CPU Cooler Height | 170 mm |
| Max PSU Length | 1 HDD Tray: 255 mm max, 2 HDD Tray: 155 mm max |
| Dimensions | Case Dimensions : 447 x 215 x 469 mm 434 x 215 x 450 mm w/o feet/protrusions/screws |
| Weight | 7.9kg |
| وزن الشحنة | 10.23 kg |
| أبعاد الطرد | 564 × 556 × 335 mm |
The three pre-installed Momentum 12 fans are designed for high airflow at low noise. They use a fluid-dynamic bearing and PWM control so the motherboard can spin them down at idle, keeping acoustics low during long sessions.
You need a standard ATX power supply with 24-pin and EPS cables. The case allows CPU coolers up to 170 mm tall, so verify your cooler height before purchasing.
A 360 mm radiator mounts in the front, but GPU clearance drops from 355 mm to 300 mm when a front radiator is installed. Measure your card length against that limit.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟