OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Fractal Design
ATX mid-tower with genuine blackened oak front panel, three included Momentum 12 fans, front USB Type-C 20 Gbps, and support for 355 mm GPUs or 360 mm front radiators
The Fractal Design North Momentum Edition Black is an ATX mid-tower case built around a steel chassis with a genuine blackened oak front panel and a glass side panel. It ships with three 120 mm Momentum fans installed at the front for immediate airflow. The case accepts ATX, mATX and Mini-ITX motherboards and holds two 3.5" and two 2.5" drives.
Three front Momentum 12 fans feed cool air directly to the GPU and CPU area while top and rear mounts provide exhaust paths. A front radiator up to 360 mm or a top radiator up to 240 mm can be fitted for liquid cooling under continuous load. Dust filters on the front, bottom and top trap particulates without choking flow during long sessions.
Tool-less removal of the top, front and side panels simplifies component access and later upgrades. The front I/O includes two USB Type-A 20 Gbps ports, one USB Type-C 20 Gbps port, an audio jack and a microphone jack. Builders should verify GPU length against the 355 mm limit, or 300 mm when a front radiator is used, and check CPU cooler height against the 170 mm maximum.
| Brand | Fractal Design |
|---|---|
| Series | North Momentum Edition |
| Model | FD-C-NOR1C-05 |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | Steel |
| With Power Supply | No |
| Power Supply | ATX |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / mATX / Mini-ITX |
| Side Panel | Yes |
| LED | No |
| Dust Filters | Front (nylon) PSU/Bottom (nylon) Top (steel) |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Front Ports | 2 x USB Type-A 20 Gbps , 1 x USB Type-C 20 Gbps, 1 x Audio jack, 1 x Microphone jack |
| Fan Options | Total fan mounts: 6 x 120 mm or 4 x 140 mm Front: 3 x 120 mm or 2 x 140 mm (3 x Momentum 12 Included) Top: 2 x 120 mm or 2 x 140 mm Rear: 1x 120 mm |
| Radiator Options | Front: Up to 360 mm Top: Up to 240 mm (See manual for RAM clearance) Rear: 120 mm |
| Max GPU Length | 355 mm |
| Max CPU Cooler Height | 170 mm |
| Max PSU Length | 1 HDD Tray: 255 mm max, 2 HDD Tray: 155 mm max |
| Dimensions | Case Dimensions : 447 x 215 x 469 mm 434 x 215 x 450 mm w/o feet/protrusions/screws |
| Weight | 7.9kg |
| 配送重量 | 10.23 kg |
| 梱包サイズ | 564 × 556 × 335 mm |
The three pre-installed Momentum 12 fans are designed for high airflow at low noise. They use a fluid-dynamic bearing and PWM control so the motherboard can spin them down at idle, keeping acoustics low during long sessions.
You need a standard ATX power supply with 24-pin and EPS cables. The case allows CPU coolers up to 170 mm tall, so verify your cooler height before purchasing.
A 360 mm radiator mounts in the front, but GPU clearance drops from 355 mm to 300 mm when a front radiator is installed. Measure your card length against that limit.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?