EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
GAMDIAS Technology
A white Micro-ATX chassis with a magnetic tempered-glass side panel, pre-installed rear 120 mm fan, top magnetic dust filter, and clearance for 350 mm graphics cards and 165 mm CPU coolers
The GAMDIAS MARS E2 White is a micro-ATX and mini-ITX case finished in Arctic White. It uses ABS, aluminum and steel construction with a bottom-mounted power supply position. A tinted tempered glass side panel attaches with magnetic closure for quick access to the interior. The black internal frame and PSU shroud keep cables and power-supply heat out of sight.
One rear 120 mm black fan ships pre-installed and the case supports up to five fans in total. A magnetic dust filter sits at the top of the chassis. Front and top mounting points each accept a 240 mm radiator, while fan mounts accept up to 140 mm units. These provisions let builders choose air or liquid cooling without adding parts.
The hinged glass panel swings open without tools, making component installation and cable routing simple. Maximum graphics-card length is 350 mm and CPU cooler height is limited to 165 mm, so longer cards or taller coolers will not fit. Power supplies longer than 160 mm are also incompatible, and only one internal 3.5-inch bay plus one 2.5-inch bay are available for storage.
| Type | Micro ATX / Mini-ITX |
|---|---|
| Color | Arctic White |
| Case Material | ABS / Aluminum / Steel |
| Power Supply Mounted | Bottom |
| Side Panel | with Side Window |
| LED | No |
| Dust Filters | Top |
| External 3.5" Drive Bays | 2 |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 1 |
| 120mm Fans | 1 |
| Max GPU Length | 350mm |
| Max CPU Cooler Height | 165mm |
| Max PSU Length | 160 mm |
| Dimensions | 15.6" x 8.3" 16.7" |
| Weight | 12.4 lbs |
The magnetic dust filter on the top panel lifts off for cleaning; frequency depends on your environment, but monthly checks keep airflow steady.
The chassis fits GPUs up to 350 mm long, matching the 350 mm clearance stated for the Mars E2.
The single pre-installed 120 mm rear fan runs at standard speed; noise level will vary with system load and any additional fans you add.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟