نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
HPE 3.5 inch internal hard drive with Fibre Channel interface

HPE

HPE 364622-B22 300 GB 10000 rpm Fibre Channel 3.5" internal hard drive

SKU CH-PKF3-0R24W

A 300 GB, 10000 rpm Fibre Channel internal hard drive in a 3.5 inch hot-swappable form factor for SAN storage

  • NAND Flash Memory TypeSLC
  • 300 GB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • Fibre Channel interface connects to SAN environments
  • 5 inch form factor fits standard drive bays
  • Hot-swappable design enables drive replacement without downtime

300 GB Fibre Channel SAN drive

This new HPE 364622-B22 is a 300 GB internal hard drive built for storage-area-network environments. It spins at 10000 rpm and connects through a Fibre Channel interface in a 3.5 inch form factor. The unit is hot-swappable and designated as an HP Qualified Option for compatible platforms.

Suits Fibre Channel arrays only

The drive fits servers and enclosures that natively support Fibre Channel backplanes and hot-swap carriers. It will not work in systems that lack a native Fibre Channel host bus adapter or corresponding drive bay. Buyers needing larger capacities or different interface protocols should select another model.

10000 rpm spindle speed

The 10000 rpm rotational speed determines the drive's baseline latency and sustained throughput for transactional workloads. Verify that the target enclosure can accommodate 10000 rpm 3.5 inch modules before purchase.

أبرز المميزات

  • 300 GB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • Fibre Channel interface connects to SAN environments
  • 5 inch form factor fits standard drive bays
  • Hot-swappable design enables drive replacement without downtime

المواصفات

BrandHPE
NAND Flash Memory TypeSLC

أسئلة حول هذا المنتج

Does the 3.5" form factor require a specific drive bay or mounting bracket?

The drive fits a standard 3.5" internal bay; hot-swap capability means the chassis must provide a compatible hot-swap carrier or backplane.

Will the Fibre Channel interface work with an existing SCSI host bus adapter?

No — Fibre Channel uses a different protocol and connector, so a dedicated Fibre Channel HBA or controller is required.

How can I verify the 10000 rpm spindle speed is active after installation?

The operating system or storage management utility will report the drive model and rotational speed; audible spin-up and SMART data also confirm operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.