暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
HPE 3.5 inch internal hard drive with Fibre Channel interface

HPE

HPE 364622-B22 300 GB 10000 rpm Fibre Channel 3.5" internal hard drive

SKU CH-PKF3-0R24W

A 300 GB, 10000 rpm Fibre Channel internal hard drive in a 3.5 inch hot-swappable form factor for SAN storage

  • NAND Flash Memory TypeSLC
  • 300 GB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • Fibre Channel interface connects to SAN environments
  • 5 inch form factor fits standard drive bays
  • Hot-swappable design enables drive replacement without downtime

300 GB Fibre Channel SAN drive

This new HPE 364622-B22 is a 300 GB internal hard drive built for storage-area-network environments. It spins at 10000 rpm and connects through a Fibre Channel interface in a 3.5 inch form factor. The unit is hot-swappable and designated as an HP Qualified Option for compatible platforms.

Suits Fibre Channel arrays only

The drive fits servers and enclosures that natively support Fibre Channel backplanes and hot-swap carriers. It will not work in systems that lack a native Fibre Channel host bus adapter or corresponding drive bay. Buyers needing larger capacities or different interface protocols should select another model.

10000 rpm spindle speed

The 10000 rpm rotational speed determines the drive's baseline latency and sustained throughput for transactional workloads. Verify that the target enclosure can accommodate 10000 rpm 3.5 inch modules before purchase.

特長

  • 300 GB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • Fibre Channel interface connects to SAN environments
  • 5 inch form factor fits standard drive bays
  • Hot-swappable design enables drive replacement without downtime

仕様

BrandHPE
NAND Flash Memory TypeSLC

この商品に関する質問

Does the 3.5" form factor require a specific drive bay or mounting bracket?

The drive fits a standard 3.5" internal bay; hot-swap capability means the chassis must provide a compatible hot-swap carrier or backplane.

Will the Fibre Channel interface work with an existing SCSI host bus adapter?

No — Fibre Channel uses a different protocol and connector, so a dedicated Fibre Channel HBA or controller is required.

How can I verify the 10000 rpm spindle speed is active after installation?

The operating system or storage management utility will report the drive model and rotational speed; audible spin-up and SMART data also confirm operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。