نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
HPE 960GB SATA read-intensive M.2 2280 internal SSD

HPE

HPE 960GB SATA Read Intensive M.2 2280 SSD P19892-B21

SKU CH-Y5H8-ANTR0

960 GB SATA read-intensive M.2 2280 solid-state drive for server storage

  • TypeTower
  • 960 GB capacity supports large read-intensive workloads
  • SATA 600 interface delivers consistent throughput for server storage
  • M.2 2280 form factor fits compatible HPE server bays
  • Read-intensive endurance suits boot and caching applications
  • Compatible with DL580 Gen10 and part numbers P19892-B21, P27213-001, P20608-003

960 GB SATA M.2 2280 SSD

This HPE solid-state drive provides 960 GB of storage over a SATA 600 interface in an M.2 2280 form factor. It is built for read-intensive workloads in HPE server environments. The drive suits administrators who need high-capacity internal storage for boot or data volumes.

Installation in DL580 Gen10 bays

The M.2 2280 module seats directly into the compatible server slot without cables or brackets. Alignment is straightforward, but the keyed connector only fits one way; forcing it risks pin damage. No driver is required for detection, though the system firmware must recognise the part number for full support.

Sustained read workload behaviour

Read-intensive endurance rating means the drive maintains consistent throughput during long sequential reads such as log ingestion or content delivery. Write-heavy bursts will hit endurance limits faster than mixed-use alternatives. Thermal throttling is managed by the server airflow design rather than an on-board heatsink.

أبرز المميزات

  • 960 GB capacity supports large read-intensive workloads
  • SATA 600 interface delivers consistent throughput for server storage
  • M.2 2280 form factor fits compatible HPE server bays
  • Read-intensive endurance suits boot and caching applications
  • Compatible with DL580 Gen10 and part numbers P19892-B21, P27213-001, P20608-003

المواصفات

TypeTower

أسئلة حول هذا المنتج

How can I confirm the 960 GB SATA 600 drive is recognised and healthy after installing it in the M.2 2280 slot?

The server BIOS or UEFI will list the 960 GB capacity on the SATA 600 interface; HPE Smart Storage Administrator then shows the drive status as OK and reports the read-intensive endurance rating.

What ships with the P19892-B21 drive and what must I source separately for installation?

The drive itself is supplied; mounting screws, thermal pads and any M.2 riser card required by the DL580 Gen10 chassis are not included.

Which HPE part number should I select when ordering a 960 GB read-intensive M.2 2280 SATA SSD for a DL580 Gen10?

Use part number P19892-B21; P27213-001 and P20608-003 are alternative HPE numbers for the same 960 GB SATA 600 read-intensive M.2 2280 drive.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.