暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
HPE 960GB SATA read-intensive M.2 2280 internal SSD

HPE

HPE 960GB SATA Read Intensive M.2 2280 SSD P19892-B21

SKU CH-Y5H8-ANTR0

960 GB SATA read-intensive M.2 2280 solid-state drive for server storage

  • TypeTower
  • 960 GB capacity supports large read-intensive workloads
  • SATA 600 interface delivers consistent throughput for server storage
  • M.2 2280 form factor fits compatible HPE server bays
  • Read-intensive endurance suits boot and caching applications
  • Compatible with DL580 Gen10 and part numbers P19892-B21, P27213-001, P20608-003

960 GB SATA M.2 2280 SSD

This HPE solid-state drive provides 960 GB of storage over a SATA 600 interface in an M.2 2280 form factor. It is built for read-intensive workloads in HPE server environments. The drive suits administrators who need high-capacity internal storage for boot or data volumes.

Installation in DL580 Gen10 bays

The M.2 2280 module seats directly into the compatible server slot without cables or brackets. Alignment is straightforward, but the keyed connector only fits one way; forcing it risks pin damage. No driver is required for detection, though the system firmware must recognise the part number for full support.

Sustained read workload behaviour

Read-intensive endurance rating means the drive maintains consistent throughput during long sequential reads such as log ingestion or content delivery. Write-heavy bursts will hit endurance limits faster than mixed-use alternatives. Thermal throttling is managed by the server airflow design rather than an on-board heatsink.

特長

  • 960 GB capacity supports large read-intensive workloads
  • SATA 600 interface delivers consistent throughput for server storage
  • M.2 2280 form factor fits compatible HPE server bays
  • Read-intensive endurance suits boot and caching applications
  • Compatible with DL580 Gen10 and part numbers P19892-B21, P27213-001, P20608-003

仕様

TypeTower

この商品に関する質問

How can I confirm the 960 GB SATA 600 drive is recognised and healthy after installing it in the M.2 2280 slot?

The server BIOS or UEFI will list the 960 GB capacity on the SATA 600 interface; HPE Smart Storage Administrator then shows the drive status as OK and reports the read-intensive endurance rating.

What ships with the P19892-B21 drive and what must I source separately for installation?

The drive itself is supplied; mounting screws, thermal pads and any M.2 riser card required by the DL580 Gen10 chassis are not included.

Which HPE part number should I select when ordering a 960 GB read-intensive M.2 2280 SATA SSD for a DL580 Gen10?

Use part number P19892-B21; P27213-001 and P20608-003 are alternative HPE numbers for the same 960 GB SATA 600 read-intensive M.2 2280 drive.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。