نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
HPE PM6 3.84 TB 2.5 inch SAS solid state drive

HPE

HPE P26306-B21 PM6 3.84 TB 2.5" SAS 24Gb/s internal hard drive

SKU CH-A0WJ-HSMB3

A 3.84 TB 2.5-inch SAS solid-state drive built for read-intensive workloads with 24Gb/s capability

  • InterfaceSAS 12Gb/s
  • Capacity3.84TB
  • NAND Flash Memory TypeSolid State Drive
  • Form Factor2.5"
  • High performance for read-intensive workloads with 3.84TB capacity
  • 24Gb/s SAS interface delivers twice the throughput of 12Gb/s drives
  • Full data-path error detection maintains data accuracy
  • Surprise power loss protection safeguards information during outages
  • 5-inch SFF form factor fits dense server deployments

HPE PM6 3.84 TB SAS SSD

The HPE P26306-B21 is a 3.84 TB solid state drive built for read-intensive workloads. It uses a 2.5-inch form factor and connects through a SAS interface. The drive is designed for high IOPS and low latency in data centre environments.

Upgrading from 12Gb SAS to 24Gb SAS

This SSD supports the SAS-4 specification and delivers up to 2x the performance of 12Gb SAS SSDs when paired with a 24Gb SAS controller. The performance jump is worth it for read caching, web servers and boot or swap volumes that need faster throughput. Full ecosystem enablement with updated server infrastructure is required to reach 24Gb speeds.

Suits read-heavy enterprise deployments

The PM6 series fits read caching, social media platforms and web serving where write endurance is less critical. Buyers who need mixed-use or write-intensive endurance should look at a different drive class. Systems without a 24Gb SAS controller cannot utilise the maximum interface speed.

أبرز المميزات

  • High performance for read-intensive workloads with 3.84TB capacity
  • 24Gb/s SAS interface delivers twice the throughput of 12Gb/s drives
  • Full data-path error detection maintains data accuracy
  • Surprise power loss protection safeguards information during outages
  • 5-inch SFF form factor fits dense server deployments

المواصفات

BrandHPE
Part NumberP26306-B21
InterfaceSAS 12Gb/s
Capacity3.84TB
NAND Flash Memory TypeSolid State Drive
Form Factor2.5"

أسئلة حول هذا المنتج

Will the 2.5" form factor fit my server's SFF drive bay?

Yes, the 2.5" small form factor matches standard SFF bays used in HPE ProLiant servers and compatible enclosures.

What controller do I need to enable the 24Gb/s SAS link on this PM6 drive?

You need a 24Gb SAS controller that supports the SAS-4 specification; the drive will negotiate down to 12Gb/s if connected to an older controller.

How often should I expect to replace a read-intensive SSD like this 3.84TB PM6 in a web-server workload?

Read-intensive SSDs are rated for lower write endurance than mixed-use drives, so plan replacement based on your actual daily write volume and the drive's SMART wear indicator.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.