暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
HPE PM6 3.84 TB 2.5 inch SAS solid state drive

HPE

HPE P26306-B21 PM6 3.84 TB 2.5" SAS 24Gb/s internal hard drive

SKU CH-A0WJ-HSMB3

A 3.84 TB 2.5-inch SAS solid-state drive built for read-intensive workloads with 24Gb/s capability

  • InterfaceSAS 12Gb/s
  • Capacity3.84TB
  • NAND Flash Memory TypeSolid State Drive
  • Form Factor2.5"
  • High performance for read-intensive workloads with 3.84TB capacity
  • 24Gb/s SAS interface delivers twice the throughput of 12Gb/s drives
  • Full data-path error detection maintains data accuracy
  • Surprise power loss protection safeguards information during outages
  • 5-inch SFF form factor fits dense server deployments

HPE PM6 3.84 TB SAS SSD

The HPE P26306-B21 is a 3.84 TB solid state drive built for read-intensive workloads. It uses a 2.5-inch form factor and connects through a SAS interface. The drive is designed for high IOPS and low latency in data centre environments.

Upgrading from 12Gb SAS to 24Gb SAS

This SSD supports the SAS-4 specification and delivers up to 2x the performance of 12Gb SAS SSDs when paired with a 24Gb SAS controller. The performance jump is worth it for read caching, web servers and boot or swap volumes that need faster throughput. Full ecosystem enablement with updated server infrastructure is required to reach 24Gb speeds.

Suits read-heavy enterprise deployments

The PM6 series fits read caching, social media platforms and web serving where write endurance is less critical. Buyers who need mixed-use or write-intensive endurance should look at a different drive class. Systems without a 24Gb SAS controller cannot utilise the maximum interface speed.

特長

  • High performance for read-intensive workloads with 3.84TB capacity
  • 24Gb/s SAS interface delivers twice the throughput of 12Gb/s drives
  • Full data-path error detection maintains data accuracy
  • Surprise power loss protection safeguards information during outages
  • 5-inch SFF form factor fits dense server deployments

仕様

BrandHPE
Part NumberP26306-B21
InterfaceSAS 12Gb/s
Capacity3.84TB
NAND Flash Memory TypeSolid State Drive
Form Factor2.5"

この商品に関する質問

Will the 2.5" form factor fit my server's SFF drive bay?

Yes, the 2.5" small form factor matches standard SFF bays used in HPE ProLiant servers and compatible enclosures.

What controller do I need to enable the 24Gb/s SAS link on this PM6 drive?

You need a 24Gb SAS controller that supports the SAS-4 specification; the drive will negotiate down to 12Gb/s if connected to an older controller.

How often should I expect to replace a read-intensive SSD like this 3.84TB PM6 in a web-server workload?

Read-intensive SSDs are rated for lower write endurance than mixed-use drives, so plan replacement based on your actual daily write volume and the drive's SMART wear indicator.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。