نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with silver SFF-8654 connector and PCIe x8 gold fingers

Innocard

Innocard PCIe 4.0 x8 ReDriver SFF-8654 8i RAID controller

SKU CH-3S32-BZP37

Converts PCIe 4.0 x8 to SFF-8654 8i with integrated ReDriver and clock buffer for 16 GT/s signal extension over longer cables

  • TypePCIe 4.0
  • PCIe 4.0 x8 at 16 GT/s for high bandwidth
  • ReDriver extends Gen 4 signals over longer cables
  • Clock buffer drives 100 MHz across extended traces
  • SFF-8654 8i connector follows SFF-9402 Rev 1.1 pin-out
  • Green LED shows the add-in card is ready

PCIe 4.0 x8 ReDriver controller

This Innocard adapter converts a PCIe 4.0 x8 slot to an internal SFF-8654 8i connector using a built-in ReDriver. It is designed for server builders who need to extend Gen4 signals over longer cables or backplanes. The card includes clock, sideband and power-break buffers to maintain link integrity across extended trace lengths. A green LED indicates when the add-in card is ready.

SFF-8654 8i interface limits

The connector follows the SFF-9402 Rev 1.1 pin-out and carries eight lanes at 16 GT/s. Signal quality depends on cable construction and total trace length because the ReDriver compensates but cannot overcome fundamental physics. The 100 MHz clock buffer and bidirectional SMCLK/SMDAT repeaters help sustain the link, yet very long or poor-quality cables may still cause errors. No RAID processing or drive management is performed on this card.

Installation notes

The controller fits a standard PCIe x8 or x16 slot and requires no additional drivers for the ReDriver function. Builders must ensure the SFF-8654 cable pin-out matches the SFF-9402 Rev 1.1 specification to avoid miswired lanes. Common issues include loose SlimSAS latch engagement and exceeding the practical reach of the ReDriver with excessive cable daisy-chaining. Verify that the host platform routes PCIe 4.0 to the chosen slot.

أبرز المميزات

  • PCIe 4.0 x8 at 16 GT/s for high bandwidth
  • ReDriver extends Gen 4 signals over longer cables
  • Clock buffer drives 100 MHz across extended traces
  • SFF-8654 8i connector follows SFF-9402 Rev 1.1 pin-out
  • Green LED shows the add-in card is ready

المواصفات

TypePCIe 4.0

أسئلة حول هذا المنتج

Which SFF-8654 8i version should I select for my server?

This controller uses a single SFF-8654 8i connector pinned to SFF-9402 Rev 1.1, so choose the matching SlimSAS cable for eight lanes.

What does the 16GT/s headline figure mean once installed?

It indicates PCIe 4.0 x8 bandwidth at 16GT/s per lane, delivered through the on-board ReDriver and clock buffer for longer traces.

What interface standard does the card use and what does it cap in practice?

The card plugs into a PCIe 4.0 x8 slot and converts the signal to SFF-8654 8i, limited to eight lanes at 16GT/s.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.