OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
KHACHIMO
New 600 W ATX server power module, tested and working, first listed March 2024
The KHACHIMO DPS-600RB A is a 600W server power module built to the ATX form factor. It is intended for technicians and system integrators who need a replacement or spare unit for compatible rackmount or pedestal servers. The module delivers standard ATX voltage rails for typical server workloads. Condition is new and each unit is test working before shipment.
The unit is rated to provide 600W of continuous output rather than only a short peak figure. This steady capacity supports server configurations that run at high utilisation for extended periods without tripping protection circuits. Good quality components help maintain stable voltages across the rails during prolonged operation. Thermal design follows the ATX specification for server environments.
The ATX form factor defines the physical dimensions, connector pinout and voltage tolerances this module must meet. Those standards set the practical ceiling for power delivery and cable compatibility in supported chassis. Builders must verify that their server backplane and cabling match the ATX pin assignments used here. No additional proprietary interfaces or extended ratings are specified for this model.
| Type | ATX |
|---|
The unit is a 600 W ATX server power module; under full load it will draw up to 600 W from the wall and exhaust heat through its internal fan, so expect typical server-grade airflow and audible fan noise during sustained operation.
As an ATX-type server power module it requires a compatible server chassis or backplane that supplies the matching ATX power connector and mounting points; no additional cables are included.
Yes — it follows the ATX form factor and power specification, so it can power legacy ATX motherboards, drive bays and peripherals that use standard ATX connectors.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟