نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Transparent polycarbonate case with iron base plate, open GPIO lid, fan mount and accessible ports

Khadas

Khadas Transparent DIY Case for VIM SBCs with Iron Plate

SKU CH-KAYV-J2JG5

A transparent polycarbonate enclosure with an iron base plate that fits VIM1, VIM1S, VIM2 v1.4, VIM3 v11+, VIM3L v12+ and VIM4 boards, exposes all ports and GPIO pins.

  • Fits VIM1, VIM2 v1.4 and newer VIM boards
  • Iron plate adds 69 g rigidity and heat spread
  • Clip-on GPIO lid keeps pins reachable for prototyping
  • Stackable design with removable covers enables cluster builds
  • Mounts 3705 or 3004 fan for active cooling

Transparent DIY Case for VIM SBCs

The Khadas Transparent DIY Case is a polycarbonate enclosure with an optional iron plate designed to house VIM single-board computers. It suits makers, developers and educators who want a clear, stackable chassis that keeps every primary port and button reachable while exposing status LEDs and the infrared receiver. A clip-on GPIO lid gives quick access to the pin header for prototyping or HAT attachment.

Port Access and Cooling Limits

All main ports, buttons, the power LED and the activity LED remain accessible through the transparent walls, and the infrared remote works without line-of-sight issues. The case accepts the 3705 and 3004 cooling fans, though the 3705 unit requires raising the top cover by one to two millimetres using spacers. VIM4 loses its Micro HDMI inlet, and Edge-V needs a slot cut for the second USB-C port on the bottom.

Stacking Capacity and Board Support

Removable top and bottom covers allow multiple units to be stacked for cluster applications, with the iron plate adding 69 grams of ballast and the case plus screws adding 43 grams. The enclosure fits VIM1, VIM1S, VIM2 v1.4, VIM3 v11 and higher, and VIM3L v12 and higher, along with both the new and original VIM heatsinks. The original Edge board is not supported.

أبرز المميزات

  • Fits VIM1, VIM2 v1.4 and newer VIM boards
  • Iron plate adds 69 g rigidity and heat spread
  • Clip-on GPIO lid keeps pins reachable for prototyping
  • Stackable design with removable covers enables cluster builds
  • Mounts 3705 or 3004 fan for active cooling

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Which VIM boards fit this case without any modification?

VIM1, VIM1S, VIM2 v1.4, VIM3 v11 and higher, and VIM4 fit directly; VIM4 lacks a cut-out for its Micro HDMI port.

How much does the complete assembly weigh once the iron plate and screws are installed?

The finished product weighs 112 g, combining the 69 g iron plate with the 43 g case and screw set.

What is the maximum fan model that can be mounted, and what clearance adjustment is needed?

The 3705 cooling fan fits if the top cover is raised 1-2 mm using spacers; the 3004 fan also mounts.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.