KingSpec NT-512-2280 512GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Consumer
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
KingSpec
A 2TB M.2 2280 SATA internal SSD with 3D NAND, sequential reads up to 580 MBps and writes up to 550 MBps, plus 58,800 random read and 62,500 random write IOPS
Model NT-2TB-2280
The KingSpec NT-2TB-2280 is a 2TB M.2 2280 internal SSD that uses the SATA interface and 3D NAND memory. It is built for consumer desktops, laptops and ultrabooks that have an M.2 SATA slot and need a large, quiet storage upgrade.
The drive delivers up to 580 MBps sequential read and 550 MBps sequential write, with 4KB random read up to 58,800 IOPS and random write up to 62,500 IOPS. That throughput handles operating systems, applications and media libraries comfortably, while the SATA 6Gbps link caps peak transfer rates at the interface limit.
The 22mm by 80mm module fits standard M.2 2280 sockets keyed for SATA and draws 1.5W at idle. It operates from 0°C to 70°C and stores safely from -20°C to 75°C at 5 to 95 percent humidity. A bundled cooling sticker assists thermal management, and the drive supports S.M.A.R.T. and intelligent error correction for ongoing health monitoring.
| Brand | KingSpec |
|---|---|
| Series | NT 2280 Series |
| Model | NT-2TB-2280 |
| Part Number | NT-2TB-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 580 MBps |
| Max Sequential Write | Up to 550 MBps |
| 4KB Random Read | Up to 58,800 IOPS |
| 4KB Random Write | Up to 62,500 IOPS |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1.5W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5% to 95% RH non-condensing |
| Height | 80.00mm |
| Width | 22.00mm |
| Depth | 3.50mm |
| Weight | 50g |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the drive uses the SATA III 6Gbps interface and the 2280 form factor, so it fits and communicates with any M.2 slot wired for SATA.
Run a sequential benchmark such as CrystalDiskMark; sustained reads near 580 MBps and writes near 550 MBps confirm the drive is performing to specification.
A cooling sticker is included; the product ships without a heatsink.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟