نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four black DDR5 RDIMM modules with silver heat spreaders

Kingston Technology Corp.

Kingston Technology Corp. KF568R34RB2K4-128 128GB (4×32GB) DDR5 6800MT/s CL34 RDIMM server RAM

SKU CH-W0JH-FA19H MPN KF568R34RB2K4-128

A 128GB quad-channel DDR5 RDIMM kit running at 6800MT/s with CL34 latency, registered ECC and Intel XMP 3.0 profiles

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6800 (PC5 54400)
  • CAS LatencyCL34
  • Timing34-44-44
  • Voltage1.40V

Capacity 128GB (4 x 32GB)

Speed DDR5 6800 (PC5 54400)

Rank 2Rx8

  • 128 GB capacity across four 32 GB modules for heavy workloads
  • DDR5 6800 MT/s speed with CL34 latency for fast response
  • Registered ECC RDIMM design for data integrity
  • Intel XMP 3.0 profile for automatic overclocking
  • 40 V operation with integrated heat spreader

Server-grade DDR5 RDIMM kit

This 128GB kit contains four 32GB DDR5-6800 registered DIMMs with CL34 latency and ECC. It targets workstations and high-end desktops that require registered memory with data-integrity features. The modules run at 1.40V and support Intel XMP 3.0 profiles for automatic configuration.

Overclockable registered ECC memory

Unlike standard server RDIMMs locked to JEDEC speeds, these modules ship rated for 6800MT/s with tight 34-44-44 timings. The jump is worthwhile when a platform supports DDR5 RDIMM overclocking via XMP 3.0 and the workload benefits from higher bandwidth without sacrificing registered signal integrity or multi-bit error correction.

Creators and data-science professionals

Suits users who need high-capacity registered ECC memory with enthusiast-grade speed profiles on compatible Intel or AMD workstation platforms. Not for consumer motherboards that accept only unbuffered UDIMMs, nor for systems that cannot supply 1.40V or lack XMP 3.0 support for the rated frequency.

أبرز المميزات

  • 128 GB capacity across four 32 GB modules for heavy workloads
  • DDR5 6800 MT/s speed with CL34 latency for fast response
  • Registered ECC RDIMM design for data integrity
  • Intel XMP 3.0 profile for automatic overclocking
  • 40 V operation with integrated heat spreader

المواصفات

BrandKingston
SeriesFury Renegade Pro
ModelKF568R34RB2K4-128
Part NumberKF568R34RB2K4-128
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6800 (PC5 54400)
CAS LatencyCL34
Timing34-44-44
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
BIOS/Performance ProfileIntel XMP 3.0
Heat SpreaderYes
FeaturesKingston FURY KF568R34RB2K4-128 is a kit of four 4G x 80-bit (32GB) DDR5-6800 CL34 SDRAM (Synchronous DRAM) 2Rx8, ECC memory module, based on twenty 2G x 8-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 128GB. Each module has been tested to run at DDR5-6800 at a low latency timing of 34-44-44 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers.
وزن الشحنة0.11 kg
أبعاد الطرد168 × 104 × 38 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the 288-pin RDIMM form factor fit standard DDR5 server slots?

Yes, the 288-pin DDR5 RDIMM design matches the industry-standard DDR5 registered DIMM slot used on compatible workstation and server motherboards.

How is the Intel XMP 3.0 profile enabled on these modules?

Enter the system BIOS, locate the memory or overclocking section, and select the XMP 3.0 profile to apply the rated 6800 MT/s speed, CL34 timings and 1.40 V voltage automatically.

When should the registered ECC RDIMMs be replaced in a continuous workload?

Registered ECC RDIMMs have no fixed replacement interval; monitor system logs for corrected or uncorrected ECC errors and replace a module if error counts rise or stability degrades.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.