NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
A 2 GB dual-channel DDR2 667 kit with CL5 latency and 1.80 V operation
This Kingston ValueRAM kit supplies two 1 GB DDR2 modules for a total of 2 GB. It runs at DDR2 667 (PC2 5300) with CL5 latency and 1.80 V. The dual-channel pair targets older desktop systems that still use DDR2 memory slots. Builders restoring or upgrading legacy hardware can use this kit to match original specifications.
Verify that the motherboard accepts DDR2 DIMMs and can run at 667 MT/s with CL5 timing at 1.80 V. Confirm the board has at least two free slots for the dual-channel kit. Older chipsets may limit usable capacity per slot, so consult the board manual for maximum supported density before ordering. ECC is not present, so the platform must support non-ECC memory.
The modules use the standard 240-pin DDR2 DIMM layout without heat spreaders. This low-profile design fits tight spaces beside large CPU coolers or in compact cases. Gold edge connectors resist oxidation for reliable long-term contact. The kit delivers up to 5.3 GB/s bandwidth per module, matching the PC2 5300 rating for period-correct performance.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR667D2K2/2GR |
| Capacity | 2GB (2 x 1GB) |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| ECC | No |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| وزن الشحنة | 0.05 kg |
| أبعاد الطرد | 171 × 95 × 13 mm |
Yes, the modules are DDR2 667 (PC2 5300) desktop DIMMs and require a motherboard that accepts DDR2 memory.
The kit is rated for 1.80 V, which is the standard DDR2 voltage, so most boards will apply it automatically.
Install one module in each channel — usually colour-coded slots — to enable dual-channel operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟