نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small square IPS LCD board with joystick and three pushbuttons on 40-pin header

LORDWORLD

LORDWORLD 1.3inch 240x240 IPS LCD Display HAT with Joystick Buttons

SKU CH-PP0V-PDJFH

A 1.3 inch IPS LCD HAT adds a 240x240 display, joystick and three pushbuttons to Raspberry Pi boards via the 40-pin GPIO header

  • 3 inch IPS panel gives wide viewing angles
  • 240 × 240 resolution in compact size
  • 40-pin GPIO header fits Raspberry Pi boards
  • Joystick plus three pushbuttons for input
  • Development resources and manual included

Compact Raspberry Pi display HAT

The LORDWORLD 1.3inch IPS LCD Display HAT adds a 240x240 colour screen to Raspberry Pi boards using the standard 40PIN GPIO header. It includes a joystick and three pushbuttons for on-device input. Development resources and a manual with Raspberry Pi examples are supplied.

Steady operation under load

The IPS panel maintains a wide viewing angle and consistent colour during continuous use. Because the HAT draws power directly from the GPIO header, sustained activity does not require a separate supply. The joystick and buttons remain responsive during long-running scripts or menu navigation.

Thermals noise and power

The small board adds minimal heat to the Raspberry Pi and operates silently with no moving parts. Power consumption is limited to what the GPIO header provides. No fan or heatsink is needed for normal indoor use.

أبرز المميزات

  • 3 inch IPS panel gives wide viewing angles
  • 240 × 240 resolution in compact size
  • 40-pin GPIO header fits Raspberry Pi boards
  • Joystick plus three pushbuttons for input
  • Development resources and manual included

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

How much current does the 1.3 inch IPS LCD and its joystick draw from the 40 pin header during continuous use?

The board draws power directly from the Raspberry Pi 40 pin GPIO header; the IPS panel and input controls add only a small load that the Pi's 5 V rail can supply without extra cooling.

Which Raspberry Pi models must I already own for the 40 pin GPIO extension header to connect this HAT?

The HAT fits any board with the standard 40 pin GPIO header — Raspberry Pi 4B, 4B+, 3B, 3B+, 2B+, Zero W, Zero WH and Zero 2 W all provide that header.

Will the 240x240 display and joystick work on an older Pi 2B+ that I keep for legacy projects?

Yes, the 40 pin GPIO header on the Pi 2B+ matches the HAT connector, and the supplied Raspberry Pi examples run on that model without modification.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.