暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small square IPS LCD board with joystick and three pushbuttons on 40-pin header

LORDWORLD

LORDWORLD 1.3inch 240x240 IPS LCD Display HAT with Joystick Buttons

SKU CH-PP0V-PDJFH

A 1.3 inch IPS LCD HAT adds a 240x240 display, joystick and three pushbuttons to Raspberry Pi boards via the 40-pin GPIO header

  • 3 inch IPS panel gives wide viewing angles
  • 240 × 240 resolution in compact size
  • 40-pin GPIO header fits Raspberry Pi boards
  • Joystick plus three pushbuttons for input
  • Development resources and manual included

Compact Raspberry Pi display HAT

The LORDWORLD 1.3inch IPS LCD Display HAT adds a 240x240 colour screen to Raspberry Pi boards using the standard 40PIN GPIO header. It includes a joystick and three pushbuttons for on-device input. Development resources and a manual with Raspberry Pi examples are supplied.

Steady operation under load

The IPS panel maintains a wide viewing angle and consistent colour during continuous use. Because the HAT draws power directly from the GPIO header, sustained activity does not require a separate supply. The joystick and buttons remain responsive during long-running scripts or menu navigation.

Thermals noise and power

The small board adds minimal heat to the Raspberry Pi and operates silently with no moving parts. Power consumption is limited to what the GPIO header provides. No fan or heatsink is needed for normal indoor use.

特長

  • 3 inch IPS panel gives wide viewing angles
  • 240 × 240 resolution in compact size
  • 40-pin GPIO header fits Raspberry Pi boards
  • Joystick plus three pushbuttons for input
  • Development resources and manual included

仕様

BrandLORDWORLD

この商品に関する質問

How much current does the 1.3 inch IPS LCD and its joystick draw from the 40 pin header during continuous use?

The board draws power directly from the Raspberry Pi 40 pin GPIO header; the IPS panel and input controls add only a small load that the Pi's 5 V rail can supply without extra cooling.

Which Raspberry Pi models must I already own for the 40 pin GPIO extension header to connect this HAT?

The HAT fits any board with the standard 40 pin GPIO header — Raspberry Pi 4B, 4B+, 3B, 3B+, 2B+, Zero W, Zero WH and Zero 2 W all provide that header.

Will the 240x240 display and joystick work on an older Pi 2B+ that I keep for legacy projects?

Yes, the 40 pin GPIO header on the Pi 2B+ matches the HAT connector, and the supplied Raspberry Pi examples run on that model without modification.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。