نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small square 4 inch IPS LCD module with resistive touch surface and HDMI connector visible

LORDWORLD

LORDWORLD 4 inch Raspberry Pi HDMI LCD 800x480 Resistive Touch IPS Display Module

SKU CH-46R6-G3APE

A 4-inch IPS display with 800x480 resolution and resistive touch connects directly to most Raspberry Pi boards

  • Sharp 800x480 hardware resolution for clear detail
  • Resistive touch control enables precise input without extra hardware
  • IPS panel delivers consistent colour from wide viewing angles
  • Direct-connect design fits most Raspberry Pi revisions instantly
  • Driver package included so setup starts immediately

4 inch HDMI LCD for Raspberry Pi

This 4 inch HDMI LCD module delivers an 800x480 hardware resolution on an IPS panel with resistive touch control. It is designed for makers and developers building portable or embedded interfaces with a Raspberry Pi single-board computer. The display connects directly to most Pi revisions without extra wiring.

Passive cooling and low power draw

The screen operates without a fan, so it adds no audible noise to a project. Power is supplied through the Raspberry Pi HDMI and GPIO headers, keeping the overall draw modest for battery-powered or enclosed builds. No external power brick is required for normal operation.

Resistive touch and broad Pi support

Resistive touch lets the screen register input through gloves or a stylus, which is useful for industrial or outdoor prototypes. Drivers are provided for the Raspberry Pi OS, enabling the touch layer and display output without manual kernel changes. Pi 1 model B and Pi Zero need an HDMI cable for connection.

أبرز المميزات

  • Sharp 800x480 hardware resolution for clear detail
  • Resistive touch control enables precise input without extra hardware
  • IPS panel delivers consistent colour from wide viewing angles
  • Direct-connect design fits most Raspberry Pi revisions instantly
  • Driver package included so setup starts immediately

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

How do I connect the 4 inch HDMI LCD to my Raspberry Pi 4 without an extra cable?

Align the board's HDMI and GPIO headers directly on the Pi 4 and press firmly until both connectors seat fully; the display draws power and video through the GPIO pins so no separate HDMI cable is needed.

Will the resistive touch layer wear out and need replacement?

Resistive touch uses a flexible top membrane that can develop permanent depressions after heavy repeated pressing; if accuracy drifts the only fix is replacing the entire display module.

At what point does the 800x480 panel become the bottleneck during long sessions?

The fixed 800 by 480 resolution limits on-screen detail and text clarity first; sustained workloads that need more pixels will hit that ceiling before the IPS panel or touch controller shows any strain.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.