We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square 4 inch IPS LCD module with resistive touch surface and HDMI connector visible

LORDWORLD

LORDWORLD 4 inch Raspberry Pi HDMI LCD 800x480 Resistive Touch IPS Display Module

SKU CH-46R6-G3APE

A 4-inch IPS display with 800x480 resolution and resistive touch connects directly to most Raspberry Pi boards

  • Sharp 800x480 hardware resolution for clear detail
  • Resistive touch control enables precise input without extra hardware
  • IPS panel delivers consistent colour from wide viewing angles
  • Direct-connect design fits most Raspberry Pi revisions instantly
  • Driver package included so setup starts immediately

4 inch HDMI LCD for Raspberry Pi

This 4 inch HDMI LCD module delivers an 800x480 hardware resolution on an IPS panel with resistive touch control. It is designed for makers and developers building portable or embedded interfaces with a Raspberry Pi single-board computer. The display connects directly to most Pi revisions without extra wiring.

Passive cooling and low power draw

The screen operates without a fan, so it adds no audible noise to a project. Power is supplied through the Raspberry Pi HDMI and GPIO headers, keeping the overall draw modest for battery-powered or enclosed builds. No external power brick is required for normal operation.

Resistive touch and broad Pi support

Resistive touch lets the screen register input through gloves or a stylus, which is useful for industrial or outdoor prototypes. Drivers are provided for the Raspberry Pi OS, enabling the touch layer and display output without manual kernel changes. Pi 1 model B and Pi Zero need an HDMI cable for connection.

Highlights

  • Sharp 800x480 hardware resolution for clear detail
  • Resistive touch control enables precise input without extra hardware
  • IPS panel delivers consistent colour from wide viewing angles
  • Direct-connect design fits most Raspberry Pi revisions instantly
  • Driver package included so setup starts immediately

Specifications

BrandLORDWORLD

Questions about this item

How do I connect the 4 inch HDMI LCD to my Raspberry Pi 4 without an extra cable?

Align the board's HDMI and GPIO headers directly on the Pi 4 and press firmly until both connectors seat fully; the display draws power and video through the GPIO pins so no separate HDMI cable is needed.

Will the resistive touch layer wear out and need replacement?

Resistive touch uses a flexible top membrane that can develop permanent depressions after heavy repeated pressing; if accuracy drifts the only fix is replacing the entire display module.

At what point does the 800x480 panel become the bottleneck during long sessions?

The fixed 800 by 480 resolution limits on-screen detail and text clarity first; sustained workloads that need more pixels will hit that ceiling before the IPS panel or touch controller shows any strain.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.